508640
14
Zoom out
Zoom in
Previous page
1/92
Next page
Thread Guide
Push the support rod firmly into the socket on the back of the machine.
Raise the support rod (C) fully, turning slightly until the position catches engage.
Position the thread guide (D) on the thread stand so that the arrow is to the front.
Guía-hilo
Estirar completamente el soporte telescópico del guía-hilo y girarlo hasta que se
enganche en la posición correspondiente (C). Inserir el guía-hilo (D) de manera
que la flecha indique hacia adelante.
Fadenführung
Den Fadenführungsstab bis zum Anschlag ausziehen , drehen, bis er bei den
entsprechenden Positionen einrastet (C). Die Fadenführung (D) auf den Faden
-
führungsstab stecken, so dass der Pfeil nach vorne zeigt .
Guide fil
Sortir le support de guide-fil jusqu’à la butée, le tourner jusqu’à ce qu’il s’encli-
quette (C) dans les positions correspondantes. Introduire le guide-fil (D) sur le
support de guide-fil de sorte que la flèche soit orientée vers l’avant.
C
D
1.2. Machine Setup / 1.2. Regulación de la máquina
1.2. Einrichten der Maschine / 1.2. Equipement de la machine
Chain thread spool holder
Lift the foam pad (A), slide the guide tabs (C) of the spool holder (B) into the
guide of the upper side of the spool holder from left to right into position (E) and
press until tab (D) clicks into the underside of rib. (F)
Pull the spool holder (B) from guide (F).
To remove the chain thread spool holder pull it rmly, while holding back the
machine at the fixed spool holder part.
Portabobinas para hilo de punto de cadeneta
Levantar la base esponjosa (A). Meter las espigas-guía (C) del porta-bobinas (B)
por delante en la guía superior del porta-bobinas fijo hasta llegar a la posición (E).
Tener cuidado que la espiga (D) haga "clic" audible al encajarse en la sujeción (F).
Para sacar el portabobinas para el hilo de punto de cadeneta, sujete la máquina
por los portabobinas fijos y saque el portabobinas adicional.
Spulenhalter für Kettenstichfaden
Die Schaumstoff-Unterlage (A) anheben. Die Führungslaschen (C) des
Spulenhalters (B) von vorne in die obere hrung des festen Spulenhalters
einschieben bis zur Position (E).
Darauf achten, dass die Lasche (D) hörbar unter der Rippe (F) einrastet.
Um denSpulenhalter für den Kettenstichfaden zu entfernen, halten Sie
die Maschine an den festen Spulenhaltern und ziehen den zusätzlichen
Spulenträger heraus.
Sous le couvercle du tissu
Soulever le support en mousse (A). Engager la languette de guidage (C) du
support de bobine par l'avant dans le guide supérieur du support de bobine fixe
jusqu'à la position (E).
Veiller à ce que la languette (D) s'encliquette de façon audible sous la nervure (F).
Equipement de la machine.
Pour retirer le support de bobine pour le fil de chaînette, tenez le support fixe de
la machine et retirez le support auxiliaire.
D
C
A
B
F
E
D
C
F
E
13
1
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bernina 1300MDC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bernina 1300MDC in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 24,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bernina 1300MDC

Bernina 1300MDC User Manual - German, Dutch, French, Italian - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info