673668
10
Zoom out
Zoom in
Previous page
1/17
Next page
900 Series 932-933 - 10 - Date 25-03-08 UM - Code SC1 - Rev. 0.1
User Manual
When the carriage is disengaged during operation and it is not moved backward and forward, the blade and
the automatic drive will stop automatically after 15 seconds.
To switch the machine off completely push the red key "main switch off".
3.6. Operation
Pull the carriage backwards (to the front of the machine) for loading the carriage when the machine is
adjusted for manual operation.
Lift up the end piece holder.
Lay the food product against the front of the meat table (upstand).
Adjust the adjustable fence (bar) according to the size of the food product.
Push the end piece holder with the spikes down upon the food product,
or place behind the food product
Adjust the slice thickness with the thickness knob.
Choose automatic or manual operation (see point 3.4.).
Manual operation
After setting up the operation (3.6) above:
Switch on the machine by pushing the green button.
In order to start the blade keep pushing the key "automatic off" button until the blade starts rotating and
the upper left LED is illuminated.
The food product is pushed against the blade by its own weight (gravity).
Move the carriage forward and backward by hand (always use the handle)
After having finished the slicing procedure turn thickness knob to zero.
By pushing the key "automatic off" shortly the blade stops
Switch off the machine at the red main switch.
Automatic operation
After setting up the operation (3.6) above:
Switch on the machine by pushing the green button.
Choose electronic functions as described in chapter 3.5
Push blue key "automatic on" in order to start the automatic operation.
The food product is pushed against the blade by its own weight (gravity).
The carriage is moved automatically
In order to stop the slicing procedure push the key "automatic off"
After having finished the slicing procedure turn thickness knob to zero.
Switch off the machine at the red main switch.
Attention! Never try to load the carriage while it is moving automatically. Always switch off
the machine first, and close the thickness plate otherwise there is a risk of injury !!
3.7. Slicing of end pieces
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel 933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel 933 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info