673668
9
Zoom out
Zoom in
Previous page
1/17
Next page
900 Series 932-933 - 9 - Date 25-03-08 UM - Code SC1 - Rev. 0.1
User Manual
3.5. Electronic Control
automatic off
(for manual mode push the automatic on
key more than 1 second)
decrease speed of carriage increase speed of carriage
main switch off main
switch on
How to use the different functions:
Switch on the machine at the main switch by pushing the green key "main switch on". Both lower LED's are
illuminated now.
In order to start the blade only, keep pushing the key "automatic off" button until the blade starts rotating.
Now the upper left LED is illuminated. As long as the carriage is moved backward and forward manually the
blade will run continuously. Push the key "automatic off" button shortly in order to stop the blade rotation.
If the carriage is not moved the blade stops turning automatically after about 15
seconds. In order to restart the rotation of the blade, keep pushing the key "automatic
off" button until the blade starts rotating again. Use the “automatic stop” button to run
the blade when sharpening the blade.
Automatic movement of the carriage:
Pull lever at the bottom of the carriage arm to the front. Move the carriage backward and forward until the
automatic carriage drive is felt to engage. Start the blade rotation as above. By pushing the key "automatic
on" the automatic (carriage drive) mode will be started. Now the upper right LED is illuminated.
The speed of the carriage can be changed by pushing the keys "decrease speed of carriage" or "increase
speed of carriage". After having switched on the machine at the main switch the speed default is always 35
strokes per minute. When choosing another speed, this will be maintained until the machine is switched off.
There are 8 speed levels:
20 strokes per minute
25 strokes per minute
30 strokes per minute
35 strokes per minute (starting speed)
40 strokes per minute
45 strokes per minute
50 strokes per minute
> 50 strokes per minute
When a higher speed level (> 35 strokes per minute) is selected, the first movement is with a speed of 35
strokes per minute when the automatic movement is started. After this first stroke the higher chosen speed
takes effect
The speed of the machine can also be adjusted when the machine is not in operation.
In order to stop the automatic carriage movement push the key "automatic off" shortly. The speed of the
carriage changes to a slower speed and the carriage stops in it’s starting position.
To restart the automatic carriage movement, push the key "automatic on" again.
O
I
0
manual
0 / I
> 1 sec
Auto-
matic
I
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berkel 933 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berkel 933 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info