779501

Bergamont Pedelec 2016 Manual

26
Zoom out
Zoom in
Previous page
1/87
Next page
50 51
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
CAUTION!
A
Make sure the handlebar clamping area is free of sharp edges (c).
Stems for threadless systems – Aheadset®
In the case of BERGAMONT bikes with Aheadset® headsets the stem also serves
to adjust the bearing preload. If you change the position of the stem, you have
to readjust the bearing play (see the chapter “The headset on the BERGAMONT
bike” and the manuals of the component manufacturers on this BERGAMONT
info CD).
The vertical setting range is determined by the intermediate rings, also re-
ferred to as spacers (d). In the case of flip-flop stem models (e) the stem can be
mounted the other way round to achieve a different handlebar height.
For modifications unscrew the bolt at the top of the fork steerer tube (f) which
serves to adjust the initial bearing pressure, remove the Ahead cap and release
the bolts on either side of the stem by up to three turns. Remove stem and
spacers from the fork steerer tube. In doing so keep hold of both frame and fork
to prevent the fork from slipping off the head tube.
You can determine the handlebar height by the arrangement of stem and spac-
ers. Slip the remaining spacers onto the fork steerer tube above the stem. Ad-
just the headset, as described in the chapter “The headset on the BERGAMONT
bike”.
If you want to turn the stem around, you have to also release the bolts of the
faceplate securing the handlebars. If the stem is fitted with a cap, you can sim-
ply take out the handlebars at this point. If it is not fitted with a cap, you have to
remove the handlebar fittings.
Mount the handlebars and, if necessary, the handlebar fittings, as described in
the chapter “Adjustment of handlebar tilt and brake levers on BERGAMONT
mountain bikes” and/or in the manuals of the component manufacturers on this
BERGAMONT info CD.
In the case of BERGAMONT mountain bikes an Aheadset®-stem (a) allows the
vertical adjustment of the handlebars. This requires special knowledge. In this
regard, the descriptions hereafter may be incomplete. If you are in doubt or if
you have any questions, contact your BERGAMONT dealer.
DANGER!
G
The stem is one of the load bearing parts of your BERGAMONT bike.
Changes to it can impair your safety. If you are in doubt or if you have any
questions, contact your BERGAMONT dealer!
DANGER!
G
These routines require a certain amount of manual skill and (special) tools.
Ask your BERGAMONT dealer to explain you both function and adjustment
of your stem or let him do that work.
DANGER!
G
The bolted connections of stem and handlebars have to be tightened to
the prescribed torque values (b). If you disregard the prescribed values, the
handlebars or stem may come loose or break. Use a torque wrench and never
exceed the maximum torque values! You will find the prescribed values in the
chapter “Recommended torque settings for your BERGAMONT bike”, directly
on the components and/or in the manuals of the component manufacturers on
this BERGAMONT info CD.
DANGER!
G
Stems come in varying lengths as well as shaft and binder tube diameters.
A stem of inappropriate dimension can become a source of danger: Han-
dlebars, stems or forks can break, resulting in an accident. When replacing any
parts be sure to only use parts that bear the appropriate mark and, to be on the
safe side, original spare parts from BERGAMONT. Your BERGAMONT dealer will
be pleased to help you.
CAUTION!
A
If you choose to use the product of another manufacturer, make sure it is
compatible with the BERGAMONT components. BERGAMONT assumes no
responsibility for problems resulting from the use of non- BERGAMONT products.
Make sure the handlebar/stem-combination is approved by the handlebar and/or
stem manufacturer.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info