779501
23
Zoom out
Zoom in
Previous page
1/87
Next page
44 45
MTB-PEDELEC | ORIGINAL OPERATING INSTRUCTIONS 2016 ORIGINAL OPERATING INSTRUCTIONS 2016 | MTB-PEDELEC
b ca e fd
ENGLISH
ENGLISH
In its end position the quick-release lever should be tight so that it can no longer
be turned. Make sure the quick-release lever does not stand out to the front or
to the side (e). The best closing position is in nearly upright position in front of
the lower leg (f).
Wheel removal
If you have an E-Thru 15 mm thru-axle system, open the quick-release lever fully.
Subsequently, turn the thru axle anticlockwise.
When the thru-axle thread no longer engages with the thread of the lower legs,
you can remove the thru axle fully.
NOTE!
i
More information are provided at www.ridefox.com
Fox E-Thru 15 QR
Wheel mounting
If you have an E-Thru 15 mm thru-axle systems (a), put the front wheel into the
fork and slide in the brake disc into the brake calliper at the same time.
Bring the front wheel into the right position between the drop-outs and slide
the axle with the E-Thru-quick-release lever open from the left side through the
drop-out and the hub (b).
When the axle thread engages with the thread of the right fork leg, turn the
axle clockwise (c). During the first turns you should be able to turn the thru axle
nearly without resistance. Tighten the axle slightly.
Close the E-Thru quick-release lever like a usual quick-release lever.
When you start closing the lever you should feel virtually no resistance with
your hand, during the second half of the way the resistance you feel should in-
crease significantly and towards the end even more strength is required to close
the lever.
In case you do not succeed in closing the lever fully, re-open it and turn the axle
a little anticlockwise. Try again to close the quick-release lever.
Use the palm of your hand while your fingers pull on the fork leg (d), but never
on a spoke or the rotor.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bergamont Pedelec 2016 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bergamont Pedelec 2016 in the language / languages: English as an attachment in your email.

The manual is 21.14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info