784247
29
Zoom out
Zoom in
Previous page
1/36
Next page
29
Maintenance
6006113_a – 01.06.2022
EN
Moisture in the fan housing.
yDripping or splashing water has penetrated the fan
housing.
yLiquid (e.g. from vases, bottles on the device) has
penetrated fan housing.
Immediately shut off the power supply, by removing
the fuse.
Make sure that the power supply cannot be
unintentionally reconnected. For example by tasking
a person with ensuring that the fuse/breaker is not
restored/switched on.
Ensure that no more liquid can penetrate the fan
housing.
Allow the fan housing to cool down.
Have the fan housing inspected and repaired by
qualified, specialist personnel prior to using the device
again.
The buttons on the control panel do not respond, the 7-segment
display on all cooking zones and on the extraction shows “L.
yThe locking function is switched on.
Switch the locking off.
D“4.4.4 Locking function” (page 18).
The display on the control panel shows “E….
yAn error message prevents use of the device.
Disconnect the device from the power supply for at
least 10 minutes.
Reconnect the device to the power supply.
Switch the device on.
The display on the control panel shows “E03”.
yAn object or a liquid is covering the buttons of the
control panel. This may continuously actuate a button.
Clean the control panel.
The display on the control panel shows “E20”.
yA communication error has occurred.
De-energise the device.
Check that the mains cable and the electrical
connection cable are not kinked, crushed or damaged.
Switch on the device again.
The display on the control panel shows “E25, E26, E27, E28”.
yThe hob has overheated.
yE25 cooking zone 1
yE26 cooking zone 2
yE27 cooking zone 3
yE28 cooking zone 4
Turn off the device.
Allow the device to cool down.
Switch on the device again.
The display on the control panel shows “E30”.
yThe air inlet of the fan is clogged.
Turn off the device.
Remove the disruptive objects from the air inlet of the
fan.
Switch on the device again.
The display on the control panel shows “U400”.
yThe power supply is too high (> 270 V).
De-energise the device.
Switch on the device again.
The display on the control panel shows “U401”.
yThe power supply is too low (< 160 V).
De-energise the device.
Switch on the device again.
The extractor hood does not respond to inputs on the device.
yThe power supply is switched off.
Check whether the all-pole mains switch is switched
on.
Switch the mains switch on.
yThe software of the extractor hood requires a restart.
Interrupt the power supply for approx. 10 seconds.
After a power interruption, the “Raise” button flashes.
yThe power supply dropped out whilst the drive motor
was in operation. The ceiling lift hood is in calibration
mode and requires a reference run.
Press the “Raise button.
The device moves fully upwards once again and then into
the set top end position.
The “Raise” and “Lower” buttons flash but the ceiling lift hood
does not move.
yThe safety switch-off took place because a problem was
detected (e.g. faulty winding or tearing of a suspension
rope).
Please consult your dealer or customer services.
Noises during cooking (e.g. humming, clicking or whistling).
yThis is not a fault! Even if the device is working perfectly
and the cookware is suitable for induction hobs,
noises may arise during cooking.
D“4.2 Cooking with induction (page 13).
If a fault persists:
Please consult your dealer or customer services.
If the device or individual components (e.g. mains or electrical
connection cables) are damaged, it is prohibited to use the
device.
Please consult your dealer or customer services.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BKF 90 iPP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKF 90 iPP in the language / languages: English as an attachment in your email.

The manual is 7.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKF 90 iPP

Berbel BKF 90 iPP User Manual - German - 36 pages

Berbel BKF 90 iPP User Manual - Dutch - 36 pages

Berbel BKF 90 iPP User Manual - French - 36 pages

Berbel BKF 90 iPP User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info