Manual Berbel BKF 90 iPP (page 17 of 36) (English)

784247

Zoom out

Zoom in

1/36

Operation

6006113_a – 01.06.2022

The following functions are available for the device without

selecting a cooking zone or extraction.

4.4.1 Count down function

Function for setting an individual countdown time from

1 minute to 9 hours, 59 minutes.

If no cooking zone is active (all power levels = 0),

the function is used irrespective of the

activities on the hob.

☞Press the plus and minus buttons at the

same time for 1 second.

If one or more cooking zones are active, the

function can be assigned to a cooking zone.

☞Press the plus and minus buttons at the

same time until the desired cooking zone

has been selected.

The symbol lights up on the selected cooking

zone or on the hob.

The countdown time on the speed on the

3x 7-segment display is preset to 0 minutes.

☞Set the countdown time using the minus

and plus buttons as follows:

yTap - 1-minute increments.

yHold - Initially 1-minute increments,

then 5-minute increments, then

10-minute increments.

yThe time starts to run 5 seconds after it is

set.

yThe 3x 7-segment display shows the

remaining time (e.g. 0 hours, 15 minutes),

the dot next to the first digit flashes.

After expiration of the adjusted time:

yAn acoustic signal is issued.

yThe 3x 7-segment display flashes.

☞Press the plus or minus button to

acknowledge.

To switch off the function:

☞Once again press the plus and minus

buttons at the same time for 1 second.

4.4.2 Pause function

Function for interruption of a cooking process with saved

settings.

☞Touch the symbol for 1 second.

yThe cooking process is interrupted.

yThe adjusted values are saved.

yAll cooking zones display the pause

symbol.

To end the function:

☞Once again, touch the symbol for

1 second.

yThe symbols of cooking zone 4 light up

alternately from left to right.

☞Touch any position on the slider of

cooking zone 4.

yThe adjusted values are reactivated.

4.4.3 Recall function

Function for restoring the settings used most recently

(e.g. after accidentally switching off ).

The following values are saved for 6 seconds after switching

off the device:

yCooking zone power levels.

yCooking zone time settings.

yAutomatic rapid heat-up settings.

ySimmering level settings.

yOperating mode and power level for extraction.

Within 6 seconds after switching off:

☞Switch on the device again.

The dot above the symbol flashes for

6 seconds.

☞Touch the symbol before the dot stops

flashing.

yThe adjusted values are reactivated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BKF 90 iPP in the language / languages: English as an attachment in your email.

The manual is 7.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BKF 90 iPP

Berbel BKF 90 iPP User Manual - German - 36 pages

Berbel BKF 90 iPP User Manual - Dutch - 36 pages

Berbel BKF 90 iPP User Manual - French - 36 pages

Berbel BKF 90 iPP User Manual - Italian - 36 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Berbel BKF 90 iPP Manual

Product: