784234
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Operation
6005134_a – 30.06.2022
EN
4.2.2 Run-on function
The device comes with a run-on function. When the function
is used, the device continues to work 10 minutes after being
switched off.
In recirculated air mode, it is necessary to use the run-on
function so that the device can remove the remaining
odours. Using the run-on function increases the life of the
filter filling. The filter filling must be replaced at regular
intervals.
The run-on function can be switched on manually or
automatically. The device is delivered with the automatic
run-on function active.
Button Function
Automatic
The device is switched on with power level 1.
Press button 1x.
yThe device switches off.
yThe run-on time (10 minutes) starts
automatically in power level 1.
yThe power level 1 button flashes.
If the button is pressed again, the device shuts
off completely.
Manual
The device is switched on, and any power
level is selected.
Press button 1x.
yThe run-on time starts in the selected power
level and switches off after 10 minutes.
If the power level POWER is selected, the
device automatically switches back to
power level 3 after 6 minutes.
yThe button for the active power level
flashes.
If the button is pressed again, the run-on
function stops.
Automatic or manual setting
The device is turned off.
Press and hold the button for longer than
10 seconds.
yAll buttons flash.
Press the button at the same time.
yThe automatic run-on function is activated
when the button is constantly illuminated.
yThe manual run-on function is activated
when the button is not illuminated.
4.2.3 Hob lighting
The hob lighting is fitted with energy-saving LED lighting.
The lighting can be used at any time and independently of
the fan.
Switch illumination on/off
Button Function
Press button 1x, in order to switch the hob
lighting on or off.
Dimming the lighting
Button Function
Press and hold the button to start
dimming the lighting.
Release the button once the desired
brightness is reached.
When the lighting is switched off and on
again, the brightness returns to 100%.
4.2.4 AutoRun
Devices equipped with the AutoRun module start
automatically when the cooktop is turned on. When the
cooktop is turned off, the device switches to run-on function
and then switches off.
Button Function
Setting automatic AutoRun
The device is turned off.
Press and hold the button for longer than
10 seconds.
yAll buttons flash.
Press the button at the same time.
yThe automatic AutoRun function is
activated when the button is constantly
illuminated.
yThe automatic AutoRun function is
deactivated when the button is not
illuminated.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BEH 80 FL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BEH 80 FL in the language / languages: English as an attachment in your email.

The manual is 10.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BEH 80 FL

Berbel BEH 80 FL User Manual - German - 32 pages

Berbel BEH 80 FL User Manual - Dutch - 36 pages

Berbel BEH 80 FL User Manual - French - 36 pages

Berbel BEH 80 FL User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info