784234
22
Zoom out
Zoom in
Previous page
1/36
Next page
22
Operation
6005134_a – 30.06.2022
Button Function
The device is turned off.
Press button 1x.
The device switches on with power level 1.
The device is turned off.
Press button for 2 seconds.
The device switches on with power
level POWER.
The device is switched on.
Press button 1x.
The device changes up one power level.
The device is switched on with power level 2
or 3.
Press button 1x.
The device changes down one power level.
The device is switched on with power level 2
or 3.
Press button for 2 seconds.
The device switches off or the automatic run-
after function starts.
The device is switched on with power level 1.
Press button 1x.
The device switches off or the automatic run-
after function starts.
The active power level is displayed by the LEDs illuminated
beneath the buttons:
y1 LED lights up = Power level 1
y2 LEDs light up = Power level 2
y3 LEDs light up = Power level 3
y3 LEDs light up in sequence = Power level POWER
The intake area can be adapted by sliding the front panel in
or out. Cooking vapours from the front of the hob are drawn
in better when the front trim is pulled out.
4.2.1 Normal operation
DWARNING!
Fire hazard due to grease residue!
In operation grease residue, which is highly inflammable,
collects in and on the device.
Clean the device properly.
D“5. Cleaning” (page 25).
To achieve an optimal efficiency in removing cooking fumes:
Turn the device on 1-2 minutes before you start cooking.
This allows the flow of air to build up, and the fumes are
removed at an early stage.
In order to collect the cooking fumes effectively, use the
rear hob plates for intensive cooking.
During the cooking process, switch to a power level that
is appropriate for the intensity of the cooking vapours:
yPower level 1 - lowest fan power - when simmering
food.
yPower level 2 - medium fan power - when cooking on
one cooking zone.
yPower level 3 - high fan power - when cooking on
several cooking zones.
If the intensity of the cooking vapours does not subside,
switch to a higher power level.
Switch to the power level POWER when searing. After
6 minutes, the device automatically switches back to
power level 3.
To activate the power level POWER permanently,
the corresponding button must be pushed again.
Then the device doesn’t switch back.
Check the fresh air supply at regular intervals.
Use the device also to reduce other unpleasant smells.
Such as from:
yOnions and garlic
yOven, microwave and steamer
yFondue and raclette
Turn on the run-on function when you have finished
cooking.
After use, turn the device off. If the automatic run-on
function is activated, the run-on time (10 minutes) starts
in power level 1.
With use of the BackFlow technology, if a power level is
active then a gentle air flow is routed from the air channel
on the underside of the device to the front air inlet. This air
circulation is necessary. The air channel on the underside of
the device must never be closed off.
After 12 hours without operation, the device (including
lighting) automatically switches off.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Berbel BEH 80 FL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Berbel BEH 80 FL in the language / languages: English as an attachment in your email.

The manual is 10.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Berbel BEH 80 FL

Berbel BEH 80 FL User Manual - German - 32 pages

Berbel BEH 80 FL User Manual - Dutch - 36 pages

Berbel BEH 80 FL User Manual - French - 36 pages

Berbel BEH 80 FL User Manual - Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info