711333

Beper VE112 Manual

12
Zoom out
Zoom in
Previous page
1/44
Next page
12
Stand Fan Use instructions
• Test the fan by rotating the blade with your hands, making sure that there is no contact with the nut.
The fan blade should rotate freely.
• The front and rear guard are held together with a guard ring, which has two grooves, one for each
of the guards. Slightly loosen the large screw at the bottom of the ring and ensure the edge of the
guard sits in the appropriate groove, all around the rear guard. Then t the front guard against the
rear guard and ensure that the edge sits properly in the other groove. Retighten the screw to secure
the guards together.
• Your new Pedestal Fan is now fully assembled.
PRODUCT AND ACCESSORIES Fig.1
1. Front guard
2. Blade cap
3. Fan blade
4. Guard nut
5. Rear guard
6. Motor housing
7. Fan body
8. Set screw
9. Height adjustment ring
10. Base tube
11. Base
12. Clamping washer
13. L-shaped screw
OPERATION:
Place the fan on a dry, level surface, plug it into a 220-240V 50Hz electrical outlet and switch on
power to the outlet. All available settings options will start ashing on the control panel. Ensure the
remote controls contains two AAA size batteries (not supplied).
Remote control operation
This fan is equipped with 3 speeds, 3 breeze modes, a 7.5hr timer and a remote control for conve-
nient operation. (You can also use the control panel to switch the fan on and off, select a speed, set
the timer and oscillation.)
ON/SPEED
• Press the ON/SPEED button (on the remote control or on the control panel) to switch on the fan.
At rst operation it will start at medium speed. On subsequent operations the fan will start at the last
selected settings.
• Press the ON/SPEED button again to select HIGH or LOW speed.
OFF
• Press the OFF button to switch off the fan.
MODE
• Press the MODE button (on the remote control) to change the fan mode through different breeze
modes.
Normal: In this mode the fan operates at a constant speed. The mode indicator is red.
Nature: In this mode the fan simulates a natural breeze mode by cycling on and off, as in nature.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper VE112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper VE112 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info