711111

Beper RI503 Manual

17
Zoom out
Zoom in
Previous page
1/74
Next page
17
Electric replace Use instructions
EN
Before use
Remove the replace from the box.
Remove all packaging and wrapping material before mounting and operating.
Package Contents
Electric Fireplace
Front Panel
Pebble Pack
Anchor bracket (for wall installation)
Installation Components Pack Containing:
Screws and Wall Anchors
Support bracket
Remote Control
Instruction Manual
Installation
Note: this replace is not equipped with any support for free-standing installation.
Warning: for correct installation and mounting of the replace, please contact specialized technical
personnel
This appliance is exclusively designed to be wall mounted at a minimum height of 30 cm from the oor (measured
from the bottom side of the glass panel), and at a minimum distance of 100 cm from the ceiling (measured from
the top side of the glass panel).
The mounting kit provided with the appliance includes:
6 screws for wall support and anchor brackets
6 wall anchors for mounting of anchor bracket
2 small screws for fastening of support bracket to the replace
1 wall anchor bracket
1 support bracket
The wall bracket must be tted horizontally and the cable routed to the bottom right of the heater.
For optimal viewing of the pebble bed and the ame effects, it is advisable to install the replace at a height of 60
cm from the oor (measured from the bottom side of the glass panel).
Before mounting the replace on the wall, it is necessary to remove the front glass panel. Carefully place the
appliance on a at and stable surface, away from any ornament or other object that may accidentally damage
the glass. Remove the screws found on the right and left side of the panel, and carefully remove the glass panel
by pulling upwards.
Note: it is advisable to use at least two people to carry out this operation, to avoid the accidental fall and
breakage of the panel.
It is now possible to proceed with wall mounting of the replace:
1. Select the wall location where you want to hang your electric replace heater. Draw a horizontal line using a
level and mark 4 drill holes for the anchor screws (Fig. A)
2. Drill 4 holes on the marked locations. Install the wall anchors into the holes and gently tap them into place with
a hammer until the ange of wall anchor is ush with the wall surface. (Fig. B)
3. Secure the anchor bracket to the wall anchors using the 4 screws provided (Fig. C)
4. Mount the replace on the wall using the slots of the metal bracket found at the back of the replace. Make
sure that the anchor bracket xed on the wall is completely engaged into the metal bracket at the back of the
replace. (Fig. D)
5. Secure the support bracket to the bottom part of the replace using the 2 smallest screws provided. (Fig. E)
6. Mark the bottom holes position on the wall, and take the replace down. Drill the wall with applicable drill bit
and insert the wall anchors. Reinstall the replace and, using the 2 left screws, fasten the bottom support bracket
to rmly install the replace in place. (Fig. F)
7. Unpack the pebbles from the bag and place them along the light unit in the desired position.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper RI503 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper RI503 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info