710311

Beper BP620 Manual

13
Zoom out
Zoom in
Previous page
1/48
Next page
13
Vacuum blender Use instructions
EN
DESCRIPTION OF THE BLENDER FIG. A:
1. Air valve
2. Anti-splash cover
3. Lid of the jar
4. Jar
5. Blades
6. Motor housing
7. Cover for noise reduction with vacuum system
8. Pusher
9. Tube for vacuum
10. Connection for the vacuum tube to motor housing
11. Connection for the vacuum tube to accessories with air valve
DESCRIPTION OF THE TRAVEL CONTAINER FIG. B:
1. Air valve
2. Safety ring = to stop the upper part of the cover
3. Cap opening button
4. Travel container lid
5. Air valve
6. Transparent vacuum stopper
7. Lid with vacuum valve and date indicator
DESCRIPTION OF THE COFFEE GRINDER FIG. C
1. Container
2. Blades
CONTROL PANNEL FIG. D
1. ON/OFF Button
2. VACUUM AND BLEND Button
3. SMOOTHIE Button
4. LOW SPEED Button
5. HIGH SPEED Button
6. PULSE Button
BUTTON 1:
ON After placing the jar complete with lid, and connecting the power cord to the electrical outlet you will hear 6
intermittent beeps and all the display lights will ash 6 times, while the ON/OFF button light will remain on, at this
point the machine enters standby mode. Keep the ON/OFF button pressed for a long time, until all the lights will
steadily light, at this point it will be possible to select the desired function.
OFF: To switch off the appliance press the ON/OFF button for about 3 seconds.
BUTTON 2 =VACUUM AND BLEND: To obtain the vacuum shake you need to insert the noise reduction cover.
By selecting this function, the appliance will automatically activate the vacuum and then blend at short intervals
of time. The shake will be ready when it appears on the scree the write END. The process can be interrupted at
any time by keeping pressed the ON/OFF button.
BUTTON 3 =SMOOTHIE: By selecting this function the appliance will not activate the vacuum but the food will
be intermittently blended for 5 cycles. The process can be interrupted at any time by keeping pressed the ON/
OFF button.
SPEED SELECTION -/+
BUTTON 4 = LOW SPEED: By selecting this function the appliance will start operating at minimum speed, then
stop after 3 minutes of continuous working. The process can be interrupted at any time by keeping pressed the
ON/OFF button.
BUTTON 5 = HIGH SPEED: By selecting this function the appliance will start operating at maximum speed, then
stop after 3 minutes of continuous working. The process can be interrupted at any time by keeping pressed the
ON/OFF button.
BUTTON 6 = PULSE: To activate this function, long press the button, release the button to stop the operation.
The appliance is set to operate continuously for 60 seconds.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BP620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BP620 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info