710311

Beper BP620 Manual

12
Zoom out
Zoom in
Previous page
1/48
Next page
12
Vacuum blender Use instructions
Before cleaning, always unplug the appliance.
To protect against electric shock, do not immerse cord, plug or any
parts of the appliance into water or other uids.
Do not hold the appliance with wet hands or feet.
Do not hold the appliance with naked feet.
Do not expose the appliance to atmospheric agents such as rain,
wind, snow, hail.
Do not use the appliance near explosives, highly ammable mate-
rials, gases, burning ames, heaters.
Do not allow children, disabled people or every people without expe-
rience or technical ability to use the appliance if they are not properly
watched over. Close supervision is necessary when any appliance
used by or near children.
Make sure that children do not play with this appliance.
If you decide not to use the appliance any longer, make it unservice-
able by simply cutting the supply cable after disconnecting the plug
from the socket.
ALSO MAKE ANY DANGEROUS PARTS UNSERVICE-
ABLE, ESPECIALLY FOR CHILDREN WHO COULD
PLAY WITH THE APPLIANCE.
SOME WARNINGS:
1. When disconnecting the plug, do not pull the power cord to avoid electric shock or short circuit;
2. When the product is not in use, please unplug it.
3. Before carrying out any cleaning and / or assembly operation, make sure that the product is switched off.
4. Start the appliance only after all components have been installed correctly.
5. During operation, do not open the cover and do not put your ngers and / or tools in the container to avoid
injury.
6. When cleaning the blades, take much care as they are very sharp and you may be injured.
7. Do not immerse the motor housing, power cord and plug in water or other liquids.
8. This appliance is equipped with a protection device against overheating if the motor is operating for a long
period of time or overloaded.
9. Do not start the appliance empty.
10. Do not exceed the maximum level indicated on the jar.
11. This appliance was built for domestic use only.
12. Do not use the product with accessories other than those supplied.
13. Never touch moving parts.
14. Never leave the appliance unattended while it is operating.
15. Do not extract the shake product from the container with the moving blades.
16. Always wait until the blades are completely stop.
17. Allow the engine to rest for at least 10 minutes between each use.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BP620 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BP620 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info