710440

Beper BF551 Manual

17
Zoom out
Zoom in
Previous page
1/72
Next page
17
Microwave oven Use instructions
EN
ADVICE FOR REHEATING FOOD
Foods must be defrosted before reheating.
Remove the packages and containers with metal parts.
Choose the correct function based on weight, temperature and type of food.
Mix the food occasionally during heating.
Cover foods with microwavable plastic wrap/cling lm to keep moisture in as well as to keep the oven clean.
DESCRIPTION Fig.1
1 – Control panel
1A – Function setting knob
1B – Timer knob
2 – Door opening button
3 – Rotating axis
4 – Rotating ring
5 – Glass plate
6 – Door with viewing window
7 – Door interlock
8 – Vents
9 – Cord supply
USE INSTRUCTION
INSTALLATION OF THE MICROWAVE OVEN
Remove all the packaging and accessories. Examine the oven to make sure the inside part or the door are not
damaged. Do not install the oven if it is damaged.
Place the microwave oven on a at surface with enough space for ventilation inlet and outlet.
A minimum space of 7.5 cm is required between the microwave oven and adjacent walls. One side must be
open.Fig.2
Allow a minimum clearance of 30 cm above the oven.
Blocking the entrance and/or output can damage the oven.
Do not remove the feet located on the bottom of the oven.
Place the oven as far as possible from the radio or television. The operation of the microwave oven can cause
interference to radio or television.
Connect the microwave oven to the electrical outlet, make sure the voltage is equal to that indicated on the label
of the oven.
!ATTENTION!
Do not install the microwave oven on a stove or other appliances that produce heat. If the unit is installed
on or near a heat source, the oven could be damaged and make void the warranty.
INSTALLATION OF TURNTABLE PLATE Fig.4
Place the rotating ring on the rotating axis inside the microwave oven (cooking space).
Place the glass plate on the rotating ring in the way that the former ts well on the rotating axis.
It is very important that the glass plate is placed properly to ensure correct rotation of the food while cooking.
Never place the glass plate upside down, as it will not t properly onto the rotating axis.
The glass plate, the rotating ring and the rotating axis are all required while cooking.
Food and containers should always be placed on the glass plate for cooking.
USE
Connect the power cord to the socket.
Cooking
Turn the function setting knob and select the desired cooking.
Turn the timer knob to select the cooking time.
After selecting the function and cooking time, the oven will begin cooking automatically.
During operation, the internal lamp lights up for all the duration of cooking.
At the end of the set time, the oven automatically stops and a beep sounds.
When the oven is off, check that the timer knob is on 0 position.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper BF551 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper BF551 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info