710517
20
Zoom out
Zoom in
Previous page
1/68
Next page
STEAM WAND
Wipe the steam wand with a damp cloth as soon as it has been used for milk frothing.
If the steam wand becomes blocked, pull the black wand cover off, insert a
ne pin into the steam wand to clear the blockage, then push the black wandcover back on.
REMOVABLE PARTS
Wash all removable parts with warm, soapy water. Dry thoroughly before reassembling.
Empty the drip tray in good time, as it can overow. The tray can be removed from the espresso
maker, emptied and washed in warm, soapywater.
The porta lter and lter sieves must be washed thoroughly and any blockages removed using a
needle or ne brush, if necessary.
HOUSING AND BOILER OUTLET
Wipe the espresso maker housing and the boiler outlet with a damp cloth.
Brush around the boiler head with a soft brush to remove any loose coffee.
DESCALING THE APPLIANCE
To keep the espresso maker working efciently, the espresso maker may need descaling (you will
notice the brewing takes longer). This will depend on the water in your area and how often the
espresso maker is used.
Citric acid made for descaling coffee makers can be used, using the following procedure:
Pour the descaling solution into the water container.
Follow the ‘Brewing Espresso’ section on page 10 (without coffee in the porta lter), switch the ap-
pliance on and run through each function. Allow 5 minutes between the use of each function.
After descaling, ll the water container with clean water and let the water run through each cycle
until the container is empty.
Rinse the porta lter with warm water.
NOTE: THE ESPRESSO MAKER PARTS ARE NOT DISHWASHER SAFE.
PROBLEM POSSIBLE CAUSE SOLUTION
The coffee is not hot
enough.
The cup(s) and/or the brewing
system are
cold.
The ground coffee is too cold.
If making milk coffee, the milk
may not be
heated enough
Preheat cups, brewing system, porta
ilter and lter sieves.
If stored in the fridge, take out the-
ground coffee a while before use.
Heat/froth milk for longer, but notabove
65°C.
20
Espresso machine Use instructions
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 90521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 90521 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info