Manual Beper 40742 (page 10 of 44) (English, German, Dutch, French, Italian, Spanish)

710690

Zoom out

Zoom in

1/44

5 in 1 hair and beard trimmer set Use Instructions

To use the trimmer, insert the guiding comb on the blade and proceed as detailed in the previous paragraph.

Note: make sure that the appliance is turned off and unplugged from the wall socket before inserting the

guiding comb on to the blade.

Precision trimmer

This head is used for maximum precision trimming of hair and beard.

Nose/ear trimmer

This accessory is used for nose and ears; by simply and carefully introducing the trimmer into nostrils and ear

holes, this accessory allows to quickly trim and/or remove unwanted hair from these areas.

Note: do not insert the trimmer too deeply into nostrils and ear holes, to avoid any damage and injury.

Shaver head

This head is used as a classic shaver, to mainly shave face and neck.

It is better to clean and dry your skin before shaving.

For best result, keep the appliance at a 45° angle, gently leaning the head on your skin, to limit any possible

rash or redness.

Note: to remove heads, make sure not to pull the blades, in order not to damage them and to avoid any

risk of injury.

Mounting the cutting heads

Make sure that the appliance is turned off and unplugged from the wall socket.

Choose the desired head, and insert it on the appliance, making sure that all the connection parts t snugly.

Make sure that the head is rmly xed to the body of the appliance (there should be no space between the head

and the appliance, and the head must be well xed and stable).

Removing the cutting heads

With the appliance switched off and unplugged from the wall socket, to remove the cutting head gently press on

the back of the head, placing your thumb on the small recess found right below the blade.

To remove the nose/ear trimmer, gently press the front part of this accessory until it is removed from the body

of the hair clipper.

Cleansing and maintenance

Before cleaning the appliance, make sure that it is switched off and unplugged from the wall socket.

Remove all the accessories, and remove hair from the blade using the small brush included in the set.

Do not place the appliance into water. Use a soft and damp cloth to clean the body of the hair trimmer.

After cleansing, lubricate the blades by pouring 2 drops of oil from the small bottle included in the set.

Technical data

Rechargeable lithium battery 3,7V – 600mAh

Adaptor: input 100-240 V / 50-60 Hz; output 5V – 1000 mA

For any improvement reasons, Beper reserves the right to modify or improve the product without any

notice.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Beper 40742 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Beper 40742 Manual

Product: