711097

Beper 2PASP001 Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
11
EN
Rechargeable vacuum cleaner Use Instructions
Crevice Nozzle
Suitable for cleaning corners, cracks or areas hard to reach. To connect and disconnect it, follow the same in-
structions of the brush (FIG. F).
Instructions for use
Connect the handle to the dust tank by aligning the upper part of the handle with the upper part of the tank then
push the lower part of the handle towards the powder tank until you hear a click (FIG. B). Connect the metallic
tube (or the chosen accessory) to the dust tank until you hear a click (FIG. C). To release the metallic tube or the
accessories, push the metal tube release button.
To turn on the appliance press the switch, to turn it off press the switch again (FIG. E).
With the +/- button placed on the handle is possible to regulate the speed.
Warning: immediately turn off the product if something gets stuck inside the suction accessory.
Cleaning the appliance
Do not use water, solvents or polishes to clean the exterior of the product, only use a dry cloth.
Make sure that no liquid enters the appliance.
Do not immerse the product in water and do not clean it in dishwasher.
How to empty the dust tank
Caution: clean the dust tank and the lter after each use; the suction power will be reduced if the
tank is full and / or the lter is clogged.
To empty the dust tank push the opening button placed under the connection between the tank and the metallic
tube. To reclose it replace the lid until you hear a click.
Push the handle release button under the handle to detach it from the tank and pull away the handle from the
tank (FIG. I).
Unscrew the upper part of the tank, the motor, by turning it counterclockwise (FIG. L).
Remove the tissue lter by using the cotton tab with “UP” sign and remove the lter housing (FIG. M).
Clean the lter and the housing in water (FIG. N).
Let the lter and the housing completely dry at the air before reassemble them.
Replace the housing and the lter inside the dust tank (FIG. O), the lter’s tab must have the word “UP” facing
upwards. Screw the motor to the dust tank by turning it clockwise, until you hear a click (FIG. P).
Be sure the lter and all parts are well positioned before reconnect the dust tank to the main body.
How to clean the motorized brush
Caution: clean the brush only after detach it from the appliance.
Pull the button on the right of the brush rightward and pull it out, proceed with cleaning, let it dry and
reassemble it correctly.
Technical data
Product:
Lithium battery 22,2v, 2200 mah
Power supply:
Input: 100-240v - 50/60hz 0,5a max
Output: 26v – 0,45a
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 2PASP001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 2PASP001 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info