711097

Beper 2PASP001 Manual

10
Zoom out
Zoom in
Previous page
1/44
Next page
10
Rechargeable vacuum cleaner Use Instructions
Description of the appliance Fig.A
1. On/off switch
2. Battery indicator
3. Handle release button
4. Speed switch button
5. Motor
6. Tank opener button
7. Dust tank
8. Metal tube release button
9. Metal tube
10. Motorized brush release button
11. Motorized brush
12. Nozzle with brushes
13. Crevice nozzle
14. Wall support
15. Battery charger
The appliance works in two different ways:
A) As a stick vacuum cleaner simply using the tube and its accessories
B) As a handheld vacuum cleaner simply using the accessories without the tube
Caution: before using make sure you have correctly assembled the appliance and its accessories.
Wall support installation
The product is equipped with a wall support and relative xing kit. The support only helps to keep the appliance
sturdy when the tube and the brush are inserted. The appliance will not be attached to the support but only
supported.
Be sure to install the wall mount so that the brush rests on the oor.
Caution: before using the product, the battery has to be fully charged.
Do not turn on the product during charging.
Before a new charge, discharge completely the battery.
The charging adapter and the top of the appliance may become hot during the charge: that is normal.
It is suggested not to charge at temperatures below 5 ° C (40 ° F) or above 40 ° C (105 ° F), this may damage
the batteries.
Battery charging
When only one line on the battery indicator ashes (FIG.G), turn off the product and connect the electric plug
of the adapter to a socket and the pin of the cable in the corresponding inlet placed on the back of the battery.
The 3 charging lights will light up in sequence. When the battery will be fully charged, the 3 lines will be light up
at the same time (FIG. H).
4 Hours recharge – 20 minutes autonomy in high speed – 40 minutes autonomy in low speed
The battery can be charged attached to the handle but also disconnected from it. To detach the battery from the
handle press the button place under the pin inlet and pull the battery outwards.
To replace the battery on the handle, insert the front part into the compartment on the handle and press the rear
part downwards.
Accessories
Motorized brush
Suitable for cleaning any type of surface, carpets included.
Insert the brush into the tube or directly to the dust tank by pressing it slightly until you hear a click (FIG. D).
To remove it, press the release button and pull the brush out.
Nozzle with brushes
Suitable for cleaning surfaces and worktops, but also sofas and fabrics. To connect and disconnect it, follow the
same instructions of the brush (FIG. F).
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Beper 2PASP001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Beper 2PASP001 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info