676002
42
Zoom out
Zoom in
Previous page
1/76
Next page
English
42
Locking control keys
With the control keys locked, you can prevent your projector settings from being changed accidentally
(by children, for example). When the Panel Key Lock is on, no control keys on the projector will
operate except POWER.
1. Go to the SYSTEM SETUP: Basic > Panel Key Lock menu and select On by pressing ◄/► on
the projector or remote control. A conrmation message appears.
2. Highlight Ye s and press MODE/ENTER.
To release Panel Key Lock, use the remote control to enter SYSTEM SETUP: Basic > Panel Key
Lock menu and press ◄/► to select Off.
y When activating Panel Key Lock, keys on the remote control are still effective.
y If pressing to turn off the projector but not disabling Panel Key Lock, panel keys
are still locked next time turning on the projector.
Operating in a high altitude environment
We recommend you use the High Altitude Mode when your environment is between 1500 m –5000
m above sea level, and ambient temperature is between 0°C–30°C.
Do not use the High Altitude Mode if your altitude is between 0 m and 1500 m and
ambient temperature is between 0°C and 35°C. The projector will be over cooled, if
you turn the mode on under such a condition.
To activate the High Altitude Mode:
1. Press MENU/EXIT and then press ◄/► until the SYSTEM SETUP: Advanced menu is
highlighted.
2. Press ▼ to select High Altitude Mode and press ◄/► to select On. A conrmation message
displays.
3. Highlight Ye s and press MODE/ENTER.
Operation under “High Altitude Mode” may cause a higher decibel operating noise level because of
increased fan speed necessary to improve overall system cooling and performance.
If you use this projector under other extreme conditions excluding the above, it may display auto shut-
down symptoms, which is designed to protect your projector from over-heating. In cases like this, you
should switch to High Altitude mode to solve these symptoms. However, this is not to state that this
projector can operate under any and all harsh or extreme conditions.
Adjusting the sound
The sound adjustments made as below will have an effect on the projector speaker(s). Be sure you have
made a correct connection to the projector audio input. See “Connection” on page 23 for how the
audio input is connected.
Input signal Audio Input AUDIO OUT
PC Mini jack Mini jack
HDMI-1, HDMI-2/MHL HDMI Mini jack
VIDEO RCA Mini jack
S-VIDEO RCA Mini jack
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LH770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LH770 in the language / languages: English as an attachment in your email.

The manual is 14,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info