676002
40
Zoom out
Zoom in
Previous page
1/76
Next page
English
40
2. Press MODE/ENTER and the 3D Color Management page displays.
3. Select Primary Color and press ◄/► to select a color from among Red, Green, Blue, Cyan,
Magenta, or Yellow.
4. Press ▼ to highlight Hue and press ◄/► to select its range. Increase in the range will include colors
consisted of more proportions of its two adjacent colors.
Please refer to the illustration to the right for how the colors
relate to each other.
For example, if you select Red and set its range at 0, only
pure red in the projected picture will be selected. Increasing
its range will include red close to yellow and red close to
magenta.
5. Press ▼ to highlight Saturation and adjust its values to
your preference by pressing ◄/►. Every adjustment made
will reect to the image immediately.
For example, if you select Red and set its value at 0, only the
saturation of pure red will be affected.
Saturation is the amount of that color in a video picture. Lower settings produce less
saturated colors; a setting of “0” removes that color from the image entirely. If the
saturation is too high, that color will be overpowering and unrealistic.
6. Press ▼ to highlight Gain and adjust its values to your preference by pressing ◄/►. The contrast
level of the primary color you select will be affected. Every adjustment made will reect to the image
immediately.
7. Repeat steps 3 to 6 for other color adjustments.
8. Make sure you have made all of the desired adjustments.
9. Press MENU/EXIT to exit the menu and save the setting.
Resetting current or all picture modes
1. Go to the PICTURE menu and highlight Reset Picture Settings.
2. Press MODE/ENTER and press ▲/▼ to select Current or All.
y Current: returns current picture mode to the factory preset settings.
y All: returns all settings, except User 1 in the PICTURE menu to the factory preset settings.
RED
BLUE
Magenta Cyan
Yellow
GREEN
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LH770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LH770 in the language / languages: English as an attachment in your email.

The manual is 14,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info