676002
27
Zoom out
Zoom in
Previous page
1/76
Next page
English
27
Operation
Starting up the projector
1. Plug the power cord into the projector and into a power
outlet. Turn on the power outlet switch (where tted). Check
that the POWER indicator light on the projector lights
orange after power has been applied.
Please use the original accessories (e.g. power
cable) only with the device to avoid possible
dangers such as electric shock and re.
2. Press POWER on the projector or on the remote control to turn on the projector.
Now you will hear the start sound. The POWER indicator light ashes and stays green when
the projector is on. The start up procedure takes about 30 seconds. In the later stage of start up, a
startup logo is projected.
(If necessary) Rotate the focus ring to adjust the image clearness.
To turn off the ring tone, refer to “Power On/Off Ring Tone” on page 43 for details.
3. To use the OSD menus, please set them to your familiar
language rst.
4. If you are prompted for a password, press the arrow keys to
enter a six digit password. See “Utilizing the password function”
on page 32 for details.
Language
Enter
Conrm
MENU
Exit
5. Switch all of the connected equipment on.
6. The projector will start to search for input signals. The current input signal being scanned displays in
the upper left corner of the screen. If the projector doesn't detect a valid signal, the message No
Signal” will continue displaying until an input signal is found. You can also press SOURCE on the
projector or remote control to select your desired input signal. See “Switching input signal” on page 34
for details.
If the frequency/resolution of the input signal exceeds the projector's operating
range, you will see the message “Out of Range” displayed on a blank screen. Please
change to an input signal which is compatible with the projector's resolution or set
the input signal to a lower setting. See “Timing chart” on page 70 for details.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ LH770 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ LH770 in the language / languages: English as an attachment in your email.

The manual is 14,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info