140583
10
Zoom out
Zoom in
Previous page
1/50
Next page
Section 1: Quick Start Guide6
English
Test the remote control
7. Initialise the display
When first turned on (and until tuned), the "First Turn On" menu will display:
The display uses the selections you make in this menu to determine which menu language to
display and which TV station programs to search for and tune appropriate to the region you
selected. This process need only ever be done once.
1. You can use the left,right, up and down buttons on the remote control or the
display to navigate through the menu, and use the OK button on the remote control or the
Input button on the display to make each selection.
2. When you select a ‘Language, the ‘Country’ and TV ‘Standard’ items will change
automatically to suit. You can select from English, Français, Nederlands, Deutsch, Italiano
and Español.
Once youve selected a ‘Language, if your country is not displayed in the ‘Country’ item, you
can select one from UK, France, Netherlands, Germany, Italy, Spain, Austria, Belgium,
Luxemburg, Switzerland, Portugal, or Others.
If ‘Others’ is selected as the ‘Country’, you will also need to select the TV broadcast standard
suitable for your region from BG, DK, I or L.
3. After youve chosen your ‘Language’, ‘Country’ and TV ‘Standard’, select the ‘Auto
Installation’ menu item and then press the OK button on the remote control. After a short
pause, the display will start searching for available programs and tune, sort and store them
for you. This may take several minutes, depending on the available TV programs in your
local reception area. Please allow the display to complete this tuning process.
Press the Power button on the remote control. The display should turn
on, and the power indicator change to green. If so, progress to the next
step (7. Initialise the display) below.
If the display does not turn on, first check that the power is available
(the power indicator will be lit red).
If so, try pressing the power button on the right of the top edge of the
display. If the display turns on by this method, the problem lies with the
remote control.
Secondly, check that the remote control batteries are properly installed.
If need be, replace the batteries with new ones or known good ones.
See the troubleshooting section at the rear of the User’s Manual for
further assistance.
To turn off the display, press the Power button on the top of the display,
or the Power button on the remote control again, and the display will
return to standby mode (the power indicator will turn red.)
DV3251-En-QuickStartGuide.fm Page 6 Tuesday, December 13, 2005 2:03 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ dv 3251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ dv 3251 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info