140583
9
Zoom out
Zoom in
Previous page
1/50
Next page
Section 1: Quick Start Guide 5
English
6. Activate the remote control
Locate the remote control and batteries from the packaging, and unwrap them.
Remote control usage tips
Point and aim the top front of the Remote Control directly at the display when pressing the
buttons. Do not cover the sensor window on the front of the display (beside the power indicator
lamp), or place objects in front of it which will block the direct line-of-sight between the Remote
Control and the display sensor window.
• Do not let the remote control become wet, or place it in humid environments (like bathrooms.)
• If the remote control sensor window on the display is in direct sunlight or strong light, the
remote control may not operate properly. In this situation, change the light source or readjust
the angle of your display, or operate the remote control from a location closer to the remote
control sensor window on the display.
Turn the remote control end up to reveal its base, and open the
lid of the battery compartment by using a small coin or
similarly curved object to rotate the slot 90° anticlockwise.
The lid is spring loaded and will popup and come loose from
the remote control body.
Insert the batteries (supplied) ensuring that the positive and
negative marked battery terminals match the (+) and (-)
marks in the battery compartment.
Note that these batteries are provided for your convenience so
that you can operate the display straight away. You should
replace them as soon as possible.
Refit the lid of the battery compartment by inserting the hinge
into the recess at one edge and levering the lid down into
position with the thumb of the hand holding the remote
control body.
Whilst holding the lid in place in this manner, use your other
hand and a small coin or similarly shaped object to rotate the
locking slot 90° clockwise locking the lid in place.
DV3251-En-QuickStartGuide.fm Page 5 Tuesday, December 13, 2005 2:03 PM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BenQ dv 3251 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BenQ dv 3251 in the language / languages: English as an attachment in your email.

The manual is 3,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info