810831
56
Zoom out
Zoom in
Previous page
1/72
Next page
EN
47
Mounted accessories
Accessories / maintenance / spare parts
Lighting system
Your pedelec is tted with modern lighting tech-
nology. In addition to the conventional features, it
also offers you safety functions such as a stan-
dlight. This means that if you are stationary at
night, e. g. at a trafc light, you are still visible
to other public road trafc participants. Equally,
some models are equipped with the newly de-
veloped daytime lights. These are supplied by
various energy sources depending on the riding
situation. For more on this, please read the in-
structions supplied by the component manufac-
turer.
Clean the reectors and headlights
of the lighting system at regular in-
tervals! Warm water and washing
up liquid sufce for this job. Keep contact
points clean and conductive with a suitable
maintenance oil!
Please read the operating instruc-
tions supplied for your light system.
If a light is not working properly, the
bulb is usually faulty in conventional
lights. If you feel condent, you can
check this yourself and replace the bulb. Suit-
able bulbs are available from your specialist
bicycle/pedelec retailer. It is not possible to
replace the bulbs in modern LED lights.
Well-functioning lighting is a matter
of life or death! Have them assem-
bled, checked and repaired by a
specialist retailer.
5 m
e.g. 1 m 0.5 m
Bike lights
The type of replacement light bulbs depend on
the lighting system installed in your pedelec. The
following list provides a guide for nding the right
bulb.
Lighting
used
Bulb
information
Bicycle lights 6 V 2.4 W
Bicycle lights
Halogen
6 V 0.6 W
Rear lamp 6 V 0.6 W
Rear light with
standlight
6 V 0.6 W
Lighting
used
Bulb
information
LED lighting LEDs
cannot be replaced
Dynamo 6 V 3 W
Hub dynamo 6 V 3 W
Dynamo
The dynamo generates the required electrical
energy for the front headlight and rear lights. Dy-
namos are often turned on by applying upward
pressure to the lever.
The lever for hub dyna-
mos are either located
on the back side of the
lamp or on the handle
bars. If the lighting sys-
tem is equipped with a
sensor, it will turn on and
off automatically.
Hub dynamo
If your pedelec uses a hub dynamo, you can
switch this on and off easily on the rear side of
your front headlight with the on / off switch. The
dynamo automatically switches on or off when
the lighting system of your pedelec has a light
sensor.
In order to remove the front wheel,
you rst have to remove the con-
nection of the light cable.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benno Pedelec - E-bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benno Pedelec - E-bike in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benno Pedelec - E-bike

Benno Pedelec - E-bike User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info