810831
30
Zoom out
Zoom in
Previous page
1/72
Next page
EN
21
like a normal quick release. Systems in which the
shaft is only inserted or screwed in and then fas-
tened with a screw also exist.
Refer to the attached component
manufacturer instructions and ask
your specialist retailer to explain the
system to you in detail.
Inappropriately installed wheels
may shift while you are riding or be-
come detached. This may damage
the pedelec or even expose the rider to se-
vere and life-threatening injuries. It is there-
fore important to take note of the following
instructions:
Ensure that the dropouts and quick re-
lease mechanisms are clean and free of
dirt and impurities.
Ask your specialist dealer to explain in de-
tail how to correctly fasten your wheel with
the quick release axle system.
Firmly fasten the front wheel.
Never ride your pedelec when you are not
sure if the front wheel has been appropri-
ately fastened and cannot come loose.
Installation
Place the wheel in the dropouts. The hub must
be rmly pushed into the dropout. Close the at-
tachment mechanism.
For vehicles with disc brakes, ensure that the
brake disk is properly inserted into the calliper.
Ensure that neither the brake disk nor the hub or
the brake disk fastening screws rub against the
lower parts of the fork.
If you do not know how to adjust
your pedelec’s disc brakes, read the
instructions provided by your brake
manufacturer.
Installing the pedals
If your pedelec was supplied without the pedals
pre-installed, these have to be attached with the
correct spanner or wrench. Please note that the
pedals have to be screwed in in different direc-
tions and secured with a high mounting torque
(see page
45
). Coat both threads with assem-
bly lubricant.
Forwards
For assembly and handling of clip-in
pedals and at pedals, please read
the manufacturer's assembly and
operating manual.
Read the attached instructions of
the component manufacturers
when using pedals with clips and
straps. Practice taking your feet in and out of
the hooks and operating the strap releases
in a safe place. Tightened straps do NOT
release the feet! This can result in falls and
injury.
Source: Shimano® techdocs
Ensure that you have read the man-
ufacturer‘s instructions before using
magnetic or clipless pedals.
Practice clipping your shoes in and
out of the pedals‘ locking system
before your rst ride in a quiet, safe
place. Any trouble releasing from clipless
pedals is a safety risk.
* see page
45
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benno Pedelec - E-bike at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benno Pedelec - E-bike in the language / languages: English as an attachment in your email.

The manual is 3.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Benno Pedelec - E-bike

Benno Pedelec - E-bike User Manual - Dutch - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info