577356
47
Zoom out
Zoom in
Previous page
1/71
Next page
01/ 2015
BENNING ST 725
38
10.2 Calling measured values
- Press the -key
to recall the stored measured values with the corresponding storage
location number. The "RECALL" symbol is shown on the display
8
.
- Press the -key again to go to the next storage location.
- Press the -key
to go to the previous storage location.
10.3 Deleting the measured value memory
- Press the -key
to recall the stored measured values with the corresponding storage
location number. The "RECALL" symbol is shown on the display
8
.
- To delete the entire measured value memory, press the -key and the -key until
the counter reading is reset to zero and "no dAtA" is shown on the display
8
.
10.4 Reading out the measured value memory via the USB interface
To read out the measured values via the USB interface
, you have to install the hardware driver
from the "Treiber-driver" directory on the enclosed CD-ROM and then the download program
from the CD-ROM's "Programm-program" directory on your PC once.
In order to download the data, please proceed as follows:
- Disconnect all connection cables and test objects from the BENNING ST 725.
- Connect the BENNING ST 725 to your PC by means of the USB connecting cable.
- The hardware driver is installed automatically on a free COM port and confirms that the new
hardware can be used.
- The COM port used can be viewed by means of the Device Manager of your system.
- Start the "BENNING Datalogger" program, go to "Tools", click "Refresh Ports" and select the
corresponding COM port. Then, click "Download".
- Press the -key of the BENNING ST 725 for approx. 5 seconds until the download
takes place and the entire measured value memory is read out.
- The measured values can be stored as a (*.csv) or (*.txt) file.
- Click "Open" to open the measured values e.g. by means of a spreadsheet program.
10.5 Printing measured values
- To use the print function, connect the optional printer BENNING PT 1 (044150) to the PS2
jack
L
of the BENNING ST 725 by means of the serial printer cable.
- As soon as the test sequence is completed and the test result has been called by means of
the -key , it is possible to print a test document by pressing the -key
.
- The BENNING ST 725 switches the BENNING PT 1 printer on and off automatically with
every print command.
Prüfung gemäss DIN VDE 0701-0702
Ident-Nr. __________________
Prüfobjekt __________________
Speicherplatz-Nr. 001
Datum 17.07.2014
Prüfung Messwert Grenzwert
RPE: 0,10 Ω 0,3 Ω
RISO: >19,99 Ω 1,0 MΩ
UISO: 500 V
IPE: < 0,15 mA 3,50 mA
Prüfergebnis bestanden
Prüfrma ______________________
Prüfer ______________________
Exampleofatestcerticate
10.6 Setting the date and time
The BENNING ST 725 is equipped with an integrated real-time clock which automatically adds a
date/ time stamp can be added to each storage process.
47


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 725 in the language / languages: English, German, French as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info