577356

Benning ST 725 Manual

36
Zoom out
Zoom in
Previous page
1/71
Next page
01/ 2015
BENNING ST 725
27
8. Measuring with the BENNING ST 725
8.1 Preparations for measuring
OperateandstoretheBENNINGST725onlyatthespeciedstorageandoperatingtempera-
tures conditions. Do not permanently expose the device to sunlight.
- Check rated voltage and rated current details specified on the safety measuring leads.
- Strong sources of interference in the vicinity of the BENNING ST 725 might lead to unstable
readings and measuring errors.
Before starting the BENNING ST 725, always check the device, the lines and the
test object for damages.
Please make sure not to exceed the maximum breaking capacity/ lamp load of
the test socket of the BENNING ST 725 (see chapters 7.4 and 7.5). Exceeding the
values might cause tripping of the fuses and damaging of the BENNING ST 725.
Damages due to overload are excluded from possible warranty claims.
The plug of the mains connection cable can be connected with the socket K of
the BENNING ST 725 in one position only (see white mark). Do not exert force
to the plug of the mains connection cable in order to avoid damaging of the
BENNING ST 725.
Before starting the test, switch the test object on (mains switch ON).
If the BENNING ST 725 is connected to the mains voltage, the test object will be
supplied with mains voltage during the protective conductor/ contact current
measurement. During measurement, check the test object for proper function-
ing!
At the beginning of the test it has to be checked whether the selected testing
procedure complies with the protection class of the connected test object.
8.2 Switching the BENNING ST 725 ON/ OFF
- Press and hold the keys
2
and
3
for approx. 3 seconds to switch the BENNING ST 725 on.
Acoustic signals confirm that the device is switched on. Press the keys again to switch the
device off.
- After approx. 2 minutes, the BENNING ST 725 switches off automatically (APO, Auto
Power-Off). It switches on again when the keys
2
and
3
are pressed. An acoustic signal
indicates that the device has switched off automatically.
8.3 Testing the mains voltage on external shock-proof socket
- Connect the mains connection cable to the mains connection socket K of the
BENNING ST 725.
- Connect the shock-proof plug to the shock-proof socket to be tested. With the mains voltage
being applied, the voltage measurement will start automatically.
- Depending on the external conductor position (right or left) of the shock-proof socket, the
voltage potentials between the connecting terminals L, N and PE will be shown on the
display for approx. 3 seconds.
or
- If the voltage potentials are within the following limiting values, there will be a next to the
"LN", "LE" and "NE" symbols.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 725 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 725 in the language / languages: English, German, French as an attachment in your email.

The manual is 10,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info