577359

Benning ST 710 Manual

19
Zoom out
Zoom in
Previous page
1/74
Next page
02/ 2011
BENNING ST 710
14
7.3 Protective conductor current and contact current by means of alternative leakage
current measurement method
Measuring range Resolution Measuring accuracy
0.10 mA - 20 mA 0.01 mA 5 % ± 2 digits
Testing voltage:
40 V
AC
, 50 Hz
Testing current
: <5mAat2kΩ
7.4 Cord test
- measurement of the protective conductor resistance according to 7.1
- measurement of the insulating resistance according to 7.2
- line break testing of the external conductor (L) and the neutral conductor (N)
- short-circuit testing of the external conductor (L) and the neutral conductor (N)
7.5 Voltage measuring on external shock-proof socket
Measuring range Resolution Measuring accuracy Overload protection
50 V - 270 V
AC
1 V
<5%
of the upper mea-
suring range value
300 V
Display:
- voltage between the external conductor (L) and the neutral conductor (N)
- voltage between the external conductor (L) and the ground conductor (PE)
- voltage between the neutral conductor (N) and the ground conductor (PE)
7.6 Limiting values according to DIN VDE 0701-0702 and ÖVE/ ÖNORM E 8701-1
Note:
Protection class
I
Protection class
II, III
Line test
Protective
conductor
resistance
R
PE
forcordswithratedcurrent≤16A:
≤ 0.3 Ω up to a length of 5 m,
per further 7.5 m:
additional0.1Ω,max.1Ω,
For cords with higher rated
currents the calculated ohmic
resistance value applies.
≤ 0.3 Ω
(
see protection
class I
)
Insulating
resistance
R
ISO
≥ 1 MΩ
≥2MΩforprovingsafe
disconnection (transformer)
≥0.3MΩfordevices
with heating element
≥ 2 MΩ
(protection class II)
,
≥0,25MΩ
(
protection class
III),
≥ 1 MΩ
Protective
conductor
current
I
EA
≤ 3.5 mA
on conductive parts with
PE connection
1 mA/ kW for devices with
heating elements P > 3.5 kW
Contact
current
I
EA
≤0.5mA
on conductive parts
without PE connection
≤ 0.5 mA
on conductive parts
without PE connection
8. Measuring with the BENNING ST 710
8.1 Preparations for measuring
OperateandstoretheBENNINGST710onlyatthespeciedstorageandoperatingtempera-
tures conditions. Do not permanently expose the device to sunlight.
- Check rated voltage and rated current details specified on the safety measuring leads.
- Strong sources of interference in the vicinity of the BENNING ST 710 might lead to unstable
readings and measuring errors.
Before starting the BENNING ST 710, always check the device, the lines and the
test object for damages.
Before starting the test, switch the test object on (mains switch ON).
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning ST 710 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning ST 710 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 7,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info