577172
10
Zoom out
Zoom in
Previous page
1/39
Next page
8.2 AC current measurement by means of analog and digital multimeters
- Set the multimeter to the function “AC current measurement” (mA AC or A
AC) and select a measurement range that can display currents from 0,5 mA
to 200 mA.
- Contact the 4 mm safety connector of the safety measuring cable with the
COM jack of the multimeter.
- Contact the red 4 mm safety connector of the safety measuring cable with
the current input jack (mA or A) of the multimeter.
- Opening lever
Operate and use meas. pliers to
clamp the single wire
live conductor.
- Read off the AC current value on the multimeter and convert to the current
value taking into account the conversion factor.
Conversion factor: 1 mA AC = 1 A AC
(see housing with label eld
)
Example:
Current value indicated on multimeter: 155 mA AC corresponds to a meas-
ured current value of 155 A AC.
8.3 AC current measurement by means of the BENNING IT 120 installation
tester
- Measurement must be carried out according to the operating manual of
the BENNING IT 120 installation tester (see chapter „TRUE RMS current
(A~)”).
- For this measurement, a conversion factor does not have to be considered.
The displayed value of the BENNING IT 120 installation tester corresponds
to the measured current value. The maximum permissible constant current
of 20 A must not be exceeded.
9. Maintenance
Before opening the BENNING CC 2, make sure that it is
disconnected from all voltages! Electrical danger!
Work on the opened BENNING CC 2 under voltage may be carried out only
by skilled electricians with special precautions for the prevention of
accidents.
Make the BENNING CC 2 voltage free as follows before opening the
instrument:
- First remove the BENNING CC 2 from the measuring object.
- Then disconnect the two safety measuring cables from the multimeter.
The clamp-on adapter BENNING CC 2 has neither a battery nor a fuse so that
as a rule it does not need to be opened.
9.1 Securing the instrument
Under certain circumstances safe operation of the BENNING CC 2 is no longer
ensured, for example in the case of:
- Visible damage of the casing.
- Incorrect measurement results.
- Recognisable consequences of prolonged storage under improper
conditions.
- Recognisable consequences of extraordinary transportation stress.
In such cases the BENNING CC 2 must be disconnected from the measuring
point immediately and secured to prevent further utilisation.
9.2 Cleaning
Clean the casing externally with a clean dry cloth (exception: special cleaning
wipers). Avoid using solvents and/or scouring agents for cleaning the
instrument.
10. Environmental notice
At the end of the product’s useful life, please dispose of it at
appropriate collection points provided in your country.
03/ 2007
BENNING CC 2
8
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benning CC2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benning CC2 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info