693641
25
Zoom out
Zoom in
Previous page
1/39
Next page
25
The BENEKOV S16 and S26 boiler is connected to the chimney using a metal pipe with a diameter of
145 or 150 mm.
The BENEKOV S51 boiler is connected to the chimney using a metal pipe with a diameter of 200 mm.
Fuel placement:
Pellets are recommended to be stored in their original packaging from the manufacturer (PET bags or
"big bags") in a dry place.
Do not store fuel behind the boiler or store it next to the boiler within a distance shorter than 400 mm.
The manufacturer recommends keeping the min. distance between the boiler and fuel at 1000 mm or to
store the fuel in a different room away from the boiler.
The room where the boiler is installed must be provided with permanent intake and outlet of air for
combustion and ventilation. Air consumption of:
- BENEKOV S16 at nominal output is about 45 m
3
. h
-1
- BENEKOV S26 at nominal output is about 75 m
3
. h
-1
- BENEKOV S51 at nominal output is about 150 m
3
. h
-1
According to regulations, an authorized person must perform the connection of the heating system pipeline
or heater heating element pipeline.
NOTE: When connecting the boiler to the heating system the lowest point as close to the
boiler as possible must be equipped with a drain tap.
6. Commissioning of the boiler - instructions for contracted service
organizations
Commissioning can only be performed by a contracted service organization authorized to conduct
this activity.
6.1. Electric connection using via connectors
In the course of putting the boiler into operation there is no need to tamper with any electrical connection of
the boiler’s control unit. Wiring of electrical components of the boiler and peripheral devices (e.g. ash
remover, automatic ignition, etc.) is via the connectors, which allows for quick and easy disconnection from
(or connection to) the boiler control unit.
Depending on the variant and equipment the boiler may be fitted with connectors marked with the following
symbols:
- Fuel feed drive connector
- Fan connector
- Automatic ignition connector
- Ash remover connector
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov S51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov S51 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info