693641

Benekov S51 Manual

24
Zoom out
Zoom in
Previous page
1/39
Next page
24
• The boiler must be positioned so that a plug socket (400V / 50Hz) is always accessible.
• The boiler is connected to the mains with a fixed and flexible power supply cord with standardized plug.
• Protection against electric shock must be made in accordance with valid ČSN EN standard (see chap.
5.1.)
Boiler placement with regard to fire regulations:
1. Positioning on a floor made of incombustible material
• Place the boiler on an incombustible thermally insulating pad exceeding the boiler floor plan on all
sides by 20 mm.
• If the boiler is located in the basement, it is advisable to place it on a substructure at least 50 mm
high. The boiler must stand horizontally so any unevenness of the substructure must be eliminated
by screwing or unscrewing the foot of the fuel container beneath the fuel screw feeder.
2. Safe distance from flammable materials
• The minimum allowable distance of the outer contours of the boiler and flue gas ducting from
flammable materials (see detailed specifications in ČSN EN 13 501-1+A1:2010) during installation
and operation of the boiler must be at least 400 mm.
Boiler positioning with regard to the necessary handling space:
• Basic environment AA5 / AB5 according to ČSN 33 2000-1 ed.2:2009
• The handling space left in front of the boiler must be at least 1000 mm
• Minimum distance between the rear part of the boiler and the wall must be 500 mm
• The gap on the side of the fuel container must be at least 500 mm
• The gap on the side of the boiler body must be at least 500 mm for the possibility to clean the convective
area of the heat exchanger and connection of the ash remover
• The gap above the fuel container must be at least 1000 mm (for BENEKOV S16 and S26 boilers) and
1400 mm (for BENEKOV S51 boiler) to allow full opening of the fuel tank cover.
Fig. No. 20 Placement of the boiler in the boiler room
Boiler positioning with regard to the chimney:
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov S51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov S51 in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info