693644
25
Zoom out
Zoom in
Previous page
1/41
Next page
Fig. 11: Sectional view at the combusting chamber of the pellets boiler
1. worm fuel feeder
2. grate
3. ignition tube
4. secondary air tube
5. ceramic reflector catalyser
6. beam of the ceraimc catalyser
d) install the reflector (5) into the combusting chamber over the burner acc. to the
Fig. 11, i.e. on the beam (6) in the boiler and pull to the back of the
combusting chamber
e) connect the boiler to the electrical power network
The sockets are connected in the way that the earthing contact is at the top and
the phase wire is connected at the left side (from the front view). The same
principle is used also for the double sockets.
The installation record and the stoking test record must be mentioned in the
certificate of warranty.
6.3 Starting up of the boiler
1. If the boiler is equipped with the fire extinguishing device with paraffin plug, fill
its tank with water.
6
5
4
3
2
1
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Benekov R51 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Benekov R51 in the language / languages: English as an attachment in your email.

The manual is 1,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info