818949
75
Zoom out
Zoom in
Previous page
1/86
Next page
Chapter 10 Service and Maintenance
See also: adjusting the height of the cutting head (page 61).
Clean the cutting disk
This procedure should be performed weekly. This is especially important if the cutting height
is set to 25mm or less. If this is the case, the wear on the anti-friction disc is increased and
will need to be replaced at least every 2 months.
Clean the cutting disc using a brush. If compressed air is available, this is preferable.
Check that it rotates smoothly. If there is a problem contact an authorized technician.
Check the cutting blades
The condition of the cutting blades is essential for a satisfactory mowing operation. The
service life of the blades depends on a number of factors. See Blade replacement (page
77) for information on these factors and means of improving the life of blades.
Every week you should inspect:
- the blades,
- the blade bolts,
- the cutter assembly.
Cutter assembly parts should be replaced every every six months or whenever they are
damaged.
Rotate the disc, so that the screw head holding the blade is visible.
Undo the screw to remove the blade.
Big mow BM 1050 User's Manual Version: Release 4.5.0 Last updated: 2022-08-20 75
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Belrobotics Parcmow Big Mow - BM1050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Belrobotics Parcmow Big Mow - BM1050 in the language / languages: English as an attachment in your email.

The manual is 5.23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info