747147
7
Zoom out
Zoom in
Previous page
1/11
Next page
108
109
APP
Adjusting the Tone Control
The Tone Control Blocking function has been developed in case you
want to make it easier for the user to use Mino. This setting can be used
to choose whether or not the user should be able to adjust the Tone
Control. If you choose to switch o the tone control buttons, you can
preset the Tone Control that will be used in user mode.
Activation and deactivation of Tone Control in User Mode
Press the
+ (9) button to activate the Tone Control buttons.
Press the
- (10) button to deactivate them.
The standard setting is Tone Control activated.
Presetting the Tone Control
Press the
< button (11) and the > button (12) to preset the Tone Control
to the level that will be used in user mode.
The standard setting is Tone Control centered (level frequency response)
Please note that if the Tone Control is activated, the preset value will be
changed as soon as the Tone Control is changed in user mode.
Blocking the T position
The T position can be blocked if you know that the T position will
not be used. This setting is for those who will never use the
T position and want to avoid selecting this position by mistake.
Press the
+ (9) button to activate the T position.
Press the
- (10) button to deactivate the T position.
The standard setting is activated T position.
Resetting to the factory setting
You can use this to reset all settings to the standard settings
the product was delivered with from the factory.
Press and hold down the
+ button (9) until all the LEDs on the
display (8) are lit. After resetting is completed, the display will
blink for a short period.
Version information
The product version information is presented here via a pattern
of lit and blinking LEDs. This internal information is only intended
as an aid for servicing and support.
Testing
It is easy to test Mino yourself. If Mino is not working as described below, you can
carry out further troubleshooting as instructed in the Troubleshooting section
below.
How to test
The testing of Mino has been divided into three parts. One part for internal micro-
phones, one part for external sound and nally one for charging.
Internal microphones
Switch on the unit and make sure that the Battery Status LED (3) lights
up green.
Connect the headphones to the Headphone Socket (13) and scrape
carefully on the round microphone (1) with your nger and check that
there is a scraping sound in the headphones.
Press the
M button (5) and make sure that the MIC LED (2) changes
colour and lights up orange.
Carefully scrape the small microphone hole on the top (1) and the round
microphone (1) with your nger and check that there is a scraping sound
in the headphones.
Press the buttons (9, 10, 11, 12) and check that the Volume and Tone LED
indicator changes.
External sound
Press the T button (7) and make sure that the External Sound LED (4) lights up
green.
Hold the unit against an electrical watch with mechanical hands
(with built-in battery) and check that it ticks.
Connect an external sound source to the External Sound Source Input (16)
and check that the sound from the sound source is heard in the headphones.
The External Sound Source Input (16) can be tested, for example, by con-
necting a CD player or a radio to the input via a BE9126 audio cable. The unit
automatically switches to an external sound source when a connector is con-
nected to the External Sound Source Input (16).
Charging
Ensure that Mino is switched o.
Connect the charger to the mains socket.
Connect the charging cable to both the charger and the unit’s charging
socket (14), see the fold-out section of the manual.
Check that the units Battery Status LED lights up.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE2030 - Mino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE2030 - Mino in the language / languages: German as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE2030 - Mino

Bellman Symfon BE2030 - Mino User Manual - English - 11 pages

Bellman Symfon BE2030 - Mino User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info