747147
6
Zoom out
Zoom in
Previous page
1/11
Next page
106
107
APP
Appendix
Settings
Bellman Audio Mino has more settings than those you can access in user mode.
By going into the Settings Menu you can adjust settings that you do not normally
need to change or which are adjusted when rst used and never need to be
changed again.
Settings Menu
How to get into the Settings Menu.
Start the unit by pressing the On/O button
i (6).
Hold down the On/O button
i (6) and press down the Volume - button
(10) within 1 second until the T LED (4) starts to blink.
When the T LED (4) starts to blink, you can release both the buttons.
Press and hold down the T button (7) within 2 seconds of the moment the T
LED (4) starts to blink.
Release the T button (7) immediately once the T LED (4) has gone out.
You are now in Balance Control mode.
Overview of the Settings Menu
In the Settings Menu you can switch
between the dierent settings by
pressing the T button (7) or
the
M button (5). Each
press of the T button
moves you clockwise on
to the next setting in the
list and the
M button
takes you anti-clockwise
to the previous setting in
the list.
When you have nished
adjusting your settings,
give a short press on the
On/O button
i (6) to
return to normal user
mode.
Balance control
The balance between the right and left-hand channels can be
set to compensate, for example, for a hearing loss in one ear.
Press the
< button (11) to adjust the balance on the left and the >
button (12) to adjust the balance on the right.
The standard setting is centered balance.
Basic attenuation
Dierent headphones have dierent sensitivity levels and you can
compensate for this with basic attenuation. What you actually set
is the attenuation you require at the maximum power output you
want to have (which is therefore 0 dB attenuation). This setting is
useful when you want to adjust the maximum volume in user mode
for a pair of headphones or in-ear phones with a higher sensitivity
than the BE9122 Bellman Stereo Headphones or, for example, if you
want to limit the volume for a child.
Use the
> button (12) to reduce the basic attenuation (increase the
volume) and the
< button (11) to increase the basic attenuation
(reduce the volume). The basic attenuation is adjusted in incre-
ments of 3 dB.
The standard setting is 0 dB attenuation, which corresponds to the
maximum output signal.
Stereo/Mono
The line-in signal can be rendered in either Stereo or in Mono.
The intelligibility of speech can be increased in certain listening
situations, such as when watching TV, if the signal is in Mono.
Press the
+ (9) button to select Stereo.
Press the
- (10) button to select Mono.
The standard setting is Stereo.
Bass reduction
Low-frequency interference such as fans and road noise can be
tiring if you are exposed to it for a long period. By activating bass
reduction, low-frequency interference and sounds are reduced.
Press the
+ (9) button to select Bass Reduction.
Press the
- (10) button to deactivate Bass Reduction and get
level frequency response.
The standard setting is deactivated Bass Reduction.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman Symfon BE2030 - Mino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman Symfon BE2030 - Mino in the language / languages: German as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman Symfon BE2030 - Mino

Bellman Symfon BE2030 - Mino User Manual - English - 11 pages

Bellman Symfon BE2030 - Mino User Manual - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info