661649
7
Zoom out
Zoom in
Previous page
1/13
Next page
103 Installers guide
Default signal pattern
When a transmitter is activated, the pager lights up a Visit LED and starts to vibrate with a certain pace. This is
called signal pattern. The transmitters determine the signal pattern, and the default is as follows:
Activated transmitter Pager LED colour Vibration, BE1470 Vibration, BE1230
Door transmitter Green Slow Slow
Push button transmitter Green Slow Slow
Telephone transmitter Yellow Medium Slow
Baby monitor Orange Fast Fast
Smoke alarm Red Long Long
Changing the signal pattern
The signal pattern can only be changed on the transmitters.
See the Installers guide in the transmitter user manual.
Replacing the battery
When the battery LED starts to blink in yellow, the battery is nearly depleted. Here is how you replace it:
Open the battery cover and press the battery eject button to remove the old battery. Insert a new 1.5 V AAA
type alkaline battery, see the battery compartment for correct positioning.
Changing the front label
If you want to use Visit for other purposes, the pager front label can be replaced. Here is how it’s done:
Open the battery cover, replace the original label with the customized one and close the cover again.
Accessories
The pager can be complemented with the following
accessories:
BE1260 Pager charger
Charges your pager during the night. Place it on the
bedside table and connect up to two bed shakers.
Please note that the pager will not vibrate when it’s
charging, but the Visit LEDs will act as usual.
BE1270 Bed shaker
Wakes you with vibrations if anything happens while you
are asleep. Connect it to the pager charger and slide it
under your pillow or mattress.
Installers guide 104
Warning! When using the pager charger ONLY USE RECHARGEABLE NiMH BATTERIES in the
pager. Non-rechargeable batteries will start to leak if the pager is placed in the charger and the
battery acid will damage the electronics. The resulting damage is not covered by warranty.
BE1260
BE1270
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1470 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1470 in the language / languages: German as an attachment in your email.

The manual is 0,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellman BE1470

Bellman BE1470 User Manual - English - 4 pages

Bellman BE1470 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info