747160
12
Zoom out
Zoom in
Previous page
1/16
Next page
Testing
It is easy to test the BE1441/1442/1443 Bellman Visit Flash Receiver. If the Flash Receiver
does not work as described below, you can check further below under Appendix/Further
information/Troubleshooting/Troubleshooting guide.
How to test
A transmitter in the Bellman Visit System which is set to the same Radio Key as the Bellman
Flash Receiver is required to test the ashing light and vibration, if the BE1270 Bellman Bed-
shaker (accessory) is connected, and the radio reception on the BE1441/1442/1443 Bellman
Visit Flash Receiver.
Press the transmitter test button.
The Bellman Visit Flash Receiver will give the following indications:
o Flashing with the ash light (2).
o The LEDs
which the transmitter has been set to indicate with or which have
been programmed into the Flash Receiver with Advanced Programming will be switched on.
o If the BE1270 Bellman Bed-shaker (accessory) is connected, it will vibrate as the
transmitter has been set to indicate or in the way the Flash Receiver has been pro
grammed with Advanced Programming.
To test the analogue telephone input:
Connect the Bellman Visit Flash Receiver to an analogue telephone socket via the Tele-
phone Input . Use the BE9105 Telephone Flex (accessory) and an adapter plug (accessory).
Ring the telephone number. The Bellman Visit Flash Receiver will then start ashing, the
yellow LED
will light up and, if a BE1270 Bellman Bed-shaker (accessory) is
connected, it will vibrate.
A short press on the Test Button (9) activates BE1441/1442/1443 so that it repeats its last
indication.
12
1 Hold down the Test Button (9) on the Bellman Visit Flash Receiver until the green and
yellow
LEDs blink alternately. The Bellman Visit Flash Receiver will now be in program-
ming mode for about 30 seconds.
2 Press the Test Button (9) three times in quick succession.
3 All LEDs remain constantly on for a few seconds.
4 All the advanced programming has now been deleted and the Bellman Visit Flash Receiver
will automatically return to normal mode.
CZ
DE
DK
ES
FI
FR
GB
GR
HU
IT
NL
NO
PL
PT
SE
SRB
APP
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellman BE1443 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellman BE1443 in the language / languages: German as an attachment in your email.

The manual is 2,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info