645675
25
Zoom out
Zoom in
Previous page
1/68
Next page
25
Bell res English
Installation instructions
The brickwork must be built up around the hearth. In connection with the hearth
expanding during burning: there must be at least 3 mm clearance on either side of the
appliance. Do not build up the brickwork farther than the top of the appliance (keep in
mind the thickness of any plastering!).
The appliance is supplied with a straight pressed steel lintel as option to allow installation
against a • at wall or in a • replace. The mantle iron is intended for supporting the brick-
work above the appliance. The mantle iron must rest on the brickwork on both sides so
that upward building is possible. The brickwork therefore must not rest on the • replace;
there must be approx. 3 mm clearance in connection with the weight.
A heat-resistant sealing cord should be placed between the appliance and the lower
side of the lintel to allow vertical expansion of the appliance and to prevent cracking
the • replace.
Do not use masking tape on the appliance
when installing and plastering.
Tape can damage the fi nish of the hearth.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires SMART BELL 90-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires SMART BELL 90-80 in the language / languages: English as an attachment in your email.

The manual is 2.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires SMART BELL 90-80

Bellfires SMART BELL 90-80 User Manual - English - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - German - 76 pages

Bellfires SMART BELL 90-80 User Manual - German - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - Dutch - 68 pages

Bellfires SMART BELL 90-80 User Manual - Dutch - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 68 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info