645675
23
Zoom out
Zoom in
Previous page
1/68
Next page
23
Bell res English
Installation instructions
2 INSTALLATION
2.1 POSITIONING THE APPLIANCE
Important: Never use combustible materials during the installation.
The appliance may not be installed against a fl ammable
rear wall.
During installation of the gas fi re, a clearance of 3 mm
should be maintained on all sides of the appliance to
allow for expansion of the appliance during operation.
Do not insulate the appliance! Only the top and sides
may be fi tted with a strip of white, loose insulation wool
(heat-resistant to 1000°C), width 15 cm max. to protect
the wall. Do not use fi breglass or Rockwool, or any other
sort of insulating material. These emit a pungent odour.
This is considered extremely unpleasant. They may
also cause discolouring of the chimney.
Flammable materials, such as curtains, should not be
placed in the vicinity of the gas fi re.
Minimum safe distance: 100 cm.
Ensure that the temperature of the fl oor under and in
front of the appliance can never rise above 85°C!
Make use of a temperature protection plate (of non-
ammable material) on the fl oor if necessary.
Take care with a fl oor made of a fl ammable material.
Minimum distance between the appliance and a front
wooden fi replace; with a depth of less than 10 cm, is:
* 5 cm on the sides: (min. distance: side appliance - leg
wooden fi replace surround)
* 40 cm at the top: (min. distance: top appliance - bottom
of beam wooden fi replace surround)
The temperature on the underside of the beam of the
wooden fi replace must never exceed 85°C.
Optional: insulate the bottom of the wooden beam
with a fi reproof plate.
Read one of the following instructions for ! tting the appliance, as applicable:
Paragraph 2.1.1 Fitting into a new chimney
Paragraph 2.1.2 Fitting into an existing opening larger than the appliance
Paragraph 2.1.3 Fitting into an existing opening equal or smaller than the appliance
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires SMART BELL 90-80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires SMART BELL 90-80 in the language / languages: English as an attachment in your email.

The manual is 2.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires SMART BELL 90-80

Bellfires SMART BELL 90-80 User Manual - English - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - German - 76 pages

Bellfires SMART BELL 90-80 User Manual - German - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - Dutch - 68 pages

Bellfires SMART BELL 90-80 User Manual - Dutch - 36 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 68 pages

Bellfires SMART BELL 90-80 Installation Guide - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info