645671
26
Zoom out
Zoom in
Previous page
1/68
Next page
26
Bell res English
Installation instructions
The brickwork or the fi re-resistant sheet construction can now be continued to ceiling
height.
If using other materials, such as stone or heat-resistant plating, you should follow the
supplier’s instructions.
For further positioning instructions: See Paragraph
2.1.4
.
Check that all connections are completely gas tight using soapy water or a leak tester.
As a check, allow the fi re to burn briefl y (maximum 1 minute).
Following verifi cation that there are no leaks, fi nish off building in the appliance.
After installation in a new fi replace and/or applying new cement work, the
appliance cannot be used for at least four weeks.
If the existing chimney has a diameter of Ø150 - 200 mm, a fl exible stainless steel
Ø100 mm pipe can be used for the fl ue gas outlet.
If the diameter of the existing chimney is over Ø200 mm, a fl exible stainless steel
Ø150 mm pipe must be used for the combustion air supply.
2.1.2 Fitting into an existing opening larger than the appliance
Place a stainless steel pipe of Ø100 mm or pipes (Ø100 mm-150 mm) into the fl ue for
the connection between the fl ue spigot of the appliance and the chimney and then
position the appliance into the fi replace. The chimney connection can be installed
according to the instructions in paragraph 2.1.4.
2.1.3 Fitting into an existing opening equal to or smaller than the appliance
If the opening in the fi replace is too small for the appliance, it must be enlarged by a
recognised installer in accordance with applicable building regulations.
2.1.4 Positioning instructions
Please follow the installation chronology below when positioning a fi replace:
1. Positioning of the appliance / Gas supply / Electrical connection:
Place the appliance in the open fi re place and position it by the wall. Install the
appliance using a level. Ensure the gas supply pipe has already been fed through
the designated opening at the rear or on the side. A gas tap must be installed in
the vicinity of the appliance that must remain accessible at all times
U.K./Ireland: the appliance is factory equipped with a gas tap.
Connecting the electric connection to an earthed wall socket.
The wall socket must remain accessible at all times.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires SMART BELL 75-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires SMART BELL 75-70 in the language / languages: English as an attachment in your email.

The manual is 2.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires SMART BELL 75-70

Bellfires SMART BELL 75-70 User Manual - English - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - German - 76 pages

Bellfires SMART BELL 75-70 User Manual - German - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - Dutch - 68 pages

Bellfires SMART BELL 75-70 User Manual - Dutch - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - French - 68 pages

Bellfires SMART BELL 75-70 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info