645671
24
Zoom out
Zoom in
Previous page
1/68
Next page
24
Bell res English
Installation instructions
2.1.1 Fitting into a new chimney
The fi replace must be mounted on a concrete fl oor. If there is no concrete fl oor, it is
essential to re-enforce the fl oorboards underneath with concrete. Build in the fi re insert
up to the top of the fi replace opening. Push the appliance into the opening and make
the chimney connection.
Connect the gas supply using the separately provided gas inlet connector. Ensure that
the gas regulating block is straight during the connection. Ensure that the gas regulating
block and pipework are not put under stress.
Make the electrical connection.
During subsequent installation, protect the gas piping against encasement by cement etc.
Important: Cement and chalk can damage
the gas piping and can, in turn,
lead to gas leaks.
The appliance can now be built in.
First determine the places for the ventilation ducts (grates, at the top and bottom of the
replace).
The appliance can be built in using brickwork or by means of fi re-resistant plates that
are screwed to a metal frame. You can, if you like, erect a natural stone mantelpiece in
front of this.
If desired, the frame can be removed temporarily, during the installation of the appliance.
First remove the door (including glass); see paragraph
5.1.
Then loosen the 3 Allen bolts on the inside of the top frame and the 2 Allen bolts at the
bottom left and bottom right respectively a couple of turns. Take the frame forwards and
remove. When the installation is completely fi nished one can place back the frame.
Make sure that the Allen bolts are securely turned
Allen bolts
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bellfires SMART BELL 75-70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bellfires SMART BELL 75-70 in the language / languages: English as an attachment in your email.

The manual is 2.48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Bellfires SMART BELL 75-70

Bellfires SMART BELL 75-70 User Manual - English - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - German - 76 pages

Bellfires SMART BELL 75-70 User Manual - German - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - Dutch - 68 pages

Bellfires SMART BELL 75-70 User Manual - Dutch - 36 pages

Bellfires SMART BELL 75-70 Installation Guide - French - 68 pages

Bellfires SMART BELL 75-70 User Manual - French - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info