648619

Bell phones Big Button Plus 20270 Manual

14
Zoom out
Zoom in
Previous page
1/18
Next page
13 010508A-1
(Fire) (Hospital) (Police)
6. Replace the handset to the base.
NOTE: If the line power is lost for a
few hours, phone numbers stored in
MEMORY are not lost. The Big Button
Plus 20270 will retain the programmed
numbers.
IMPORTANT: When programming
emergency numbers and/or making test
calls to emergency numbers:
1. Remain on the line and briefly explain
to the dispatcher the reason for the call
before hanging up.
2. Perform such activities during off-
peak hours such as early morning or
late evening.
To Dial an Emergency Number
1. Lift the handset and listen for a dial
tone.
2. Press the desired button. The
number stored in that button's
memory location will be dialed.
To program 10 frequently called
phone numbers
1. Pick up the handset (or activate the
speakerphone).
2. Press and release the store button.
3. Enter the phone number (up to 16
digits).
4. Press and release the store button.
5. Press location number (0-9) where
you want to stored
6. To store more phone numbers or
modify existing numbers in memory,
repeat steps 1-5 .
Recalling Stored Numbers From Two
Touch Memory
1. Pick up the handset and listen for a
dial tone.
2. Press the MEMO button.
3. Press the corresponding memory
location key (0 - 9). The stored
telephone number will be dialed out
automatically.
Transfer and Store Phone Numbers
from an In-Coming Call (70 Calls) to
Memory Locations (01-10).
1. On-Hook state.
2. Press the Review UP or DOWN
button to select the desired call.
3. Press the STORE button.
4. Press the desired emergency button
or 10 two-touch memory locations.
5. To transfer and store more phone
numbers in memory, repeat steps
1-4.
NOTE: Number stored previously in
the selected location will be replaced by
the one recently stored. To prevent
number from being deleted accidentally.
You are advised to view the memory
location (01-10) record before storing
the number.
Viewing the Stored Number (one-
touch)
1. On-Hook State.
2. Press the desired three emergency
numbers button.
3. The pre-stored phone number and
location number will display. If no
number was previously stored, the
display shows only the location
number.
Viewing the Stored Number (two-
touch)
1. On-Hook State.
2. Press the MEMO button.
3. Press the desired location number
button (0-9).
4. The pre-stored phone number and
location number will display. If no
number was previously stored, the
display shows only the location
number.
GLOSSARY OF TERMS
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bell phones Big Button Plus 20270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bell phones Big Button Plus 20270 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info