648619

Bell phones Big Button Plus 20270 Manual

9
Zoom out
Zoom in
Previous page
1/18
Next page
010508A-1 8
(Figure 1)
NOTE: If you do not have a standard
modular wall jack, have a qualified
technician mount one on the wall.
Handset Retainer Tab Installation
If the base unit is to be placed in the
wall mount position, the handset retainer
tab must be pulled out, turned around
and placed in the opposite direction, so
that the tab allows the handset to hang
onto the base unit, as shown in figure 2
(Figure 2)
OPTIONAL AC ADAPTOR
CAUTION: Use only with Class 2
AC Adaptor (not included)with a rating
of 120VAC input, DC6V, 100 mA
output with a center tip that is negative.
The adaptor plug must correctly fit the
machine’s DC jack.
1. Plug the AC Adaptor into a standard
AC outlet.
2. Insert the small plug into the DC
jack on the rear of the base.
NOTE: If you wish to order the optional
AC Adaptor, an Accessory Order Form
has provided with this unit.
CALLER ID OPERATION
Setting the Language Mode
After the battery installation and power
connection, the LCD panel will display
“E F S”
where, E = English
F = French
S = Spanish
1. Press either the Review UP or
DOWN button to select the desired
language.
2. Press the DELETE button to
confirm , then display will change
to show “set area code.”
Setting the Area Code
1. Press review UP or DOWN button
to select the correct digit number.
2. Press DELETE button to confirm
and shift to the next digit.
3. Repeat steps 1-2 to set the next two
digits.
4. After the area code is completed,
press DELETE button again to
change the display to TIME/DATE
setting.
Setting the TIME/DATE
The first digit will be blinking
1. Press repeatedly either the Review
UP or DOWN button to set the
correct time and date.
2. Press the DELETE button to shift
the cursor to the next setting.
3. Once the correct TIME/DATE is
shown on the display, press the
DELETE button to confirm the
setting.
Changing the Language Mode, and
Time/Date
SET TIME/DATE
SET TIME/DATE
Handset
Retainer
Tab
Studs
Modular
Wall
Plate
Wall Mount
slots
Base Unit
(Side View)
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bell phones Big Button Plus 20270 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bell phones Big Button Plus 20270 in the language / languages: English as an attachment in your email.

The manual is 0,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info