Manual Bell Dashboard 300 (page 6 of 34) (English, French, Spanish)

773366

Zoom out

Zoom in

1/34

programming the computer

STEP 4: Set Distance for Maintenance Reminder– After setting age and weight, the preset number of 600

km (or miles) will ash. Press the RIGHT button to select 200, 400, 600 or 800 km (or mile) maintenance interval,

then press the LEFT button to conrm. When your odometer (ODO) reaches the selected distance interval, the

wrench icon ( ) will ash, reminding you to service your bicycle (check tires and other parts for wear, lubricate

chain, etc…). Press the LEFT button to stop the wrench icon ( ) from ashing.

STEP 5: Set the Clock– The clock function will appear at the bottom of the screen. Press and hold the LEFT

button for 3 seconds to get a ashing "24H" symbol. Press the RIGHT button to select between 12 and 24 hour

format. Press the LEFT button to conrm. Next, the hour digits will start to ash. Use the RIGHT button to select the

hour and press the LEFT button to conrm. Repeat for minutes digits. Press the LEFT button once more to set the

clock. Press the RIGHT button to enter ODO mode.

STEP 6: Test to Ensure Proper Installation– Now that the computer is programmed, insert it into the

bracket. Spin the front wheel. The speed tendency icon in the upper left corner of the screen should be turning as

the computer starts recording data (Refer to Troubleshooting in case of problems).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bell Dashboard 300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bell Dashboard 300 Manual

Product: