Manual Bell Dashboard 300 (page 4 of 34) (English, French, Spanish)

773366

Zoom out

Zoom in

1/34

installation

STEP 1: Install the Battery– Remove the battery cover from the bottom of the computer using a small coin

(Figure 1). Install the computer battery (3.0V/CR2032) with the positive (+) pole facing up. Replace the battery

cover and tighten. Note: Replacing the battery will erase all stored information. When installing a new battery

after having used the computer, make sure to write down the odometer value before changing the battery so

you can later re-enter it in the computer.

STEP 2: Install the Magnet to the Wheel – Clamp the magnet to a spoke on the right side of the front

wheel (Figure 2). Make sure that the magnet is facing the outside of the wheel so that the at side of the

magnet passes in front of the sensor.

STEP 3: Attach the Sensor to the Fork – Attach the computer sensor to the right fork leg using two of the

cable ties provided. Make sure the metal side of the sensor is facing the wheel. Do not fully secure the cable

ties yet, as the sensor location may require further adjustment (Figure 3). Adjust the sensor and magnet loca-

tion so that clearance between the two is no greater than 2mm. (Figure 4). The magnet should now pass by

the tip of the sensor when the wheel rotates.

STEP 4: Install the Mounting Bracket & Computer – Attach the mounting bracket to the handlebar by

using the remaining 2 cable ties as shown in (Figure 4). Make sure the mounting bracket is clamped tightly

and will not slip on the handlebar. Insert the computer into the mounting bracket (Figure 5). When adjustments

have been made and the computer operates correctly, tighten completely all nuts and bolts.

Sensor

or Magnet

5mm

Sensor

Magnet

Sensor

Top View

Bicycle fork

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bell Dashboard 300 in the language / languages: English, French, Spanish as an attachment in your email.

The manual is 1.14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bell Dashboard 300 Manual

Product: