797069
40
Zoom out
Zoom in
Previous page
1/44
Next page
Problem cause Solution
The door does not open. The door lock is activated due to the
water level in the machine.
• Drain the water from the machine by
running the Pump or Spin programme.
The machine is heating the water or is in
the spin cycle.
• Wait for the program to complete.
The loading door must be blocked
because of the pressure it is under.
• Grasp the handle, push and pull the
loading door, then release it and open it.
If there is no power supply, the
loading door of the device does not
open.
• To open the loading door, open
the pump filter cap and push the
emergency handle on the back of
the cap. Refer to the “Loading
door lock” section
Washing takes longer
than expected
in the manual
of use.(*)
The water pressure is low. • The machine waits until an adequate
amount of water is drawn in order to
avoid poor quality washing due to low
water quantity. This is the reason why
the washing time is prolonged.
The voltage is low. • The washing time is extended to
avoid poor washing results when the
power supply voltage is low.
Water inlet temperature is low. • The time required for water heating
is extended during cold seasons.
Furthermore, the washing time can
be extended to avoid poor washing
results.
The number of rinses and/or the amount of
rinse water has increased.
• The machine increases the
amount of rinse water when a
good rinse is needed and adds an
extra rinse step if needed.
Too much suds have formed and the
automatic suds absorption system has
been activated due to excessive
detergent use.
• Use the recommended amount
of detergent.
The program duration
does not perform any
counting process. (On
models with display) (*)
The timer may stop while drawing
water.
• The timer indicator will not count
down until the machine takes in an
adequate amount of water. The
machine will wait until there is
enough water, to avoid poor
washing results due to lack of water.
The timer indicator will resume
counting down after this.
The timer could stop during the
heating phase.
• The timer indicator will not
count down until the machine
reaches the selected
temperature.
The timer could stop during the
spin phase.
• An unbalanced load automatic
detection system is activated due to
uneven distribution of laundry in
the drum.
The program duration does
not perform any counting
process. (*)
The machine may contain an
unbalanced load.
• An unbalanced load automatic
detection system is activated due to
uneven distribution of laundry in
the drum.
40 / EN Washing machine / User manual
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8716 XBWST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8716 XBWST in the language / languages: English as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8716 XBWST

BEKO WTV8716 XBWST User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info