797069
9
Zoom out
Zoom in
Previous page
1/44
Next page
4.1.2 Removal of conditioning reinforcements
Tilt the machine backwards to remove the packaging
reinforcement. Remove the packaging backing by
pulling on the tape. Do not perform this operation
yourself.
4.1.3 Removing transport locks 1
Unscrew all bolts using a suitable wrench until they turn freely.
Remove the security screws by gently turning them.
Place the plastic covers, provided in the bag containing the user
manual, over the openings on the back of the panel.
2
3
ATCAUTION :Remove the transport safety bolts before operating the washing machine!
Otherwise, the machine will be damaged.
VS
Save the safety screws carefully so that you can reuse them in case you need to transport
the washing machine later.
Install the shipping safety bolts in the reverse order of the disassembly procedure.
Never move the device without the transportation safety screws being
correctly fastened!
4.1.4 Connecting the water supply
VSThe water pressure required at the inlet to operate the machine must be between 1 and 10
bar (0.1 – 1 MPa). It is necessary to have 10 – 80 liters of water from the wide open tap in
one minute, so that your machine works without problems. Attach a pressure reducer if the
water pressure is greater.
ATCAUTION :Models with a single water inlet should not be connected to the hot water tap.
This type of connection will damage the laundry or the product will go into protection mode
and not work.
CAUTION :Do not use old inlet hoses on your new product. They could
stain your laundry.
9 / EN Washing machine / User manual
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8716 XBWST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8716 XBWST in the language / languages: English as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8716 XBWST

BEKO WTV8716 XBWST User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info