797069
8
Zoom out
Zoom in
Previous page
1/44
Next page
4.1 Setup
VSDuring installation, when you power on the product for the first time, the calibration
mode* must be started.
Calibration mode allows the machine to correctly detect the amount of laundry loaded. To
activate the calibration mode, the Drum Clean** program must be selected and the spin speed
option must be cancelled.
During the cycle, the drum must be empty.
It takes about 15 minutes. To end calibration mode, the program must be run to
completion.
* Calibration mode may not be available for all models.
* * The name of the program may change depending on the models. You can check the
explanation part of the program to choose the correct program.
• Contact the nearest Authorized Service Agent for installation of your product.
• Preparing the location and electrical, water tap and sewage facilities
at the installation site is the responsibility of the customer.
• Check that the water inlet and drain hoses, as well as the power cable, are
not bent, pinched, or crushed when pushing the product into place, after
installation or cleaning procedures. .
• Make sure that the installation and electrical connections of the appliance
are carried out by an authorized service agent. The manufacturer cannot
be held liable for damage caused by repairs carried out by unauthorized
persons.
• Before proceeding with the installation, check the product for any defects. If you
identify one, do not proceed with the installation. Damaged products pose risks
to your safety.
4.1.1 Suitable installation location
• Place the product on firm, level ground. Do not place your device on a high-
pile carpet or other similar surface.
• When the washing machine and the dryer are stacked, their total weight - when
loaded - is 180 kg. Place the product on solid, level ground with sufficient load-
bearing capacity.
• Do not install the product on the power cable.
• Do not install the product in environments where the temperature is below 0 ºC.
• To reduce vibration and noise, it is advisable to leave space around the
machine.
• If you are going to install the machine on a surface with steps, never place it close
to the edges.
• Do not place the product on a platform.
• Do not place or use any heat sources (hobs, irons, ovens, etc.) on the
washing machine.
8 / EN Washing machine / User manual
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO WTV8716 XBWST at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO WTV8716 XBWST in the language / languages: English as an attachment in your email.

The manual is 4.84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO WTV8716 XBWST

BEKO WTV8716 XBWST User Manual - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info