796255
27
Zoom out
Zoom in
Previous page
1/171
Next page
27 / EN
Robot Vacuum / User Manual
General Error Conditions
Failure Cause and remedy
Cannot be operated
1. Charging level is low. Place the robot vacuum cleaner to the charg-
ing dock so that it shall be aligned with the charging poles. Bring the
button on the left of the robot vacuum cleaner to position “I”; and
the vacuum cleaner shall be operated automatically (When the robot
vacuum cleaner is completely discharged, you shall need to charge
for a while for automatic operation).
2. The ambient temperature is very low (under 0 °C) or very high
(above 50 °C). Please use the robot vacuum cleaner at an ambient
temperature from 0 to 40 °C.
3. Please ensure that the on/off button on the side of the robot vacuum
cleaner is brought to position “I”.
Battery not charging
1. Please remove the robot vacuum cleaner and check if the indicator
light on the charging dock station is illuminated and ensure that both
ends of the power adaptor of the charging dock are connected.
2. Loose contact. Please clean the spring contacts on the charging
dock and the charging contacts on the robot vacuum cleaner.
3. Please ensure that the on/off button on the side of the robot vacuum
cleaner is brought to position “I”.
Does not return to the dock/
station for charging
1. There are too many obstacles around the charging dock. Please
place the charging dock to an area free of obstacles.
2. The robot vacuum cleaner is too far away from the charging dock.
Bring the robot vacuum cleaner closer to the charging dock and try
again.
3. Make sure that the charging stand station is plugged and there is
energy.
Abnormal operation Turn off and on again.
Operates with abnormal
noise. Foreign materials may have entered to the main brush, side brushes
and the wheels. Please turn off the robot vacuum cleaner and clean it.
Cleaning performance is
low / dust leaks
1. Dust container is full. Please clean the dust container.
2. Filter is clogged. Please clean or replace the filter.
3. Foreign materials may have entered to the main brush. Please clean
the main brush.
7 Troubleshooting
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO VRR 70214 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO VRR 70214 in the language / languages: English, French, Italian, Polish as an attachment in your email.

The manual is 40.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info