762779
31
Zoom out
Zoom in
Previous page
1/45
Next page
31/EN
determine if the rinse aid available in your
machine is adequate. You shall add rinse
aid to the rinse aid compartment when the
low rinse aid warning indicator starts to
illuminate.
End of Program
Program End indicator illuminates when the
washing program has ended.
1. Turn off your machine with the On-Off /
Program Selection knob.
2. Turn off the tap.
3. Remove the plug from the outlet.
After washing your dishes, keep them
inside the machine for cooling for
approximately 15 minutes. Your dishes
shall dry faster if you leave the door of
your machine ajar within this period.
This shall improve the drying efficiency
of the machine.
Setting the Rinse aid Amount
1. While the Program Selection Knob is
“Off”, press and hold the Half Load/
Tablet function key of your machine
and rotate the Program Selection
Knob one step clockwise and keep the
function key pressed for 3 seconds.
Machine switches to rinse aid setting
mode.
2. When the rinse aid setting mode is
activated, the rinse aid level in the
memory is indicated by the program
monitoring LEDs for 5 seconds.
3. Bring the Program selection knob to
the proper position for the new rinse
aid amount setting.
4. Press the Start / Pause / Cancel key
once to record the selected setting in
the memory.
5. Machine returns to normal mode when
you bring the Program Selection knob
to “Off” position again.
1
2
53
4
Rinse Aid
Amount
Level of
program
selection
knob
Rinse Aid Setting Indicator
Applies 1
dose of rinse
.aid
1 The washing indicator on
.the panel illuminates
Applies 2
dose of rinse
.aid
2 The drying indicator on the
.panel illuminates
Applies 3
dose of rinse
.aid
3 The End indicator on the
.panel illuminates
Applies 4
dose of rinse
.aid
4
The Washing, Drying and
End indicators on the panel
.illuminate
No dose of
rinse aid is
.applied 5
The Washing, Drying and
End indicators on the panel
flashes with intervals of 1
.second
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BEKO DVS05C20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BEKO DVS05C20 in the language / languages: English as an attachment in your email.

The manual is 8,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of BEKO DVS05C20

BEKO DVS05C20 User Manual - German - 41 pages

BEKO DVS05C20 User Manual - Dutch - 40 pages

BEKO DVS05C20 User Manual - French - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info